نتایج جستجو برای: bending loads

تعداد نتایج: 68710  

2012
Janin Reifenrath Daniel Gottschalk Nina Angrisani Silke Besdo Andrea Meyer-Lindenberg

BACKGROUND Different animal models are used as fracture models in orthopaedic research prior to implant use in humans, although biomechanical forces can differ to a great extend between species due to variable anatomic conditions, particularly with regard to the gait. The rabbit is an often used fracture model, but biomechanical data are very rare. The objective of the present study was to meas...

2012
Hui Hu Zifeng Yang Partha Sarkar

An experimental study was conducted to characterize the dynamic wind loads and evolution of the unsteady vortex and turbulent flow structures in the near wake of a horizontal axis wind turbine model placed in an atmospheric boundary layer wind tunnel. In addition to measuring dynamic wind loads (i.e., aerodynamic forces and bending moments) acting on the wind turbine model by using a high-sensi...

2012
Sung-Uk Kuh Young-Sung Kim Hong-June Choi Kyung-Hyun Kim Jeong-Yoon Park Hyun-Yong Jeong Dong-Kyu Chin Keun-Su Kim Young-Sul Yoon Yoon-Chul Lee Yong-Eun Cho

OBJECTIVE Polyaxial pedicle screws are a safe, useful adjunct to transpedicular fixation. However, the large screw head size can cause soft tissue irritation, high rod positioning, and facet joint injury. However, the mechanical resistance provided by small and low profile pedicle screws is very limited. We therefore developed a novel, low profile pedicle screw using grooving and blasting treat...

In the present research, data extracted from the stress analysis of 46 finite element models, verified using test results obtained from an experimental investigation, were used to study the effect of geometrical parameters on the chord-side stress concentration factors (SCFs) of central and outer braces in uniplanar tubular KT-joints of offshore structures subjected to four different types of i...

2016
J. Bonada M. M. Pastor F. Roure M. Casafont

A pallet rack is a structure in which the beams and uprights are cold-formed steel sections. The beam-upright connections are normally clipped in order to select the beam levels required and for ease of assembly. For this reason, the uprights contain holes and perforations distributed along their length. The complexity of these components, with local, distortional and torsional/flexural bucklin...

Journal: :Facta universitatis - series: Architecture and Civil Engineering 2006

Journal: :Minutes of the Proceedings of the Institution of Civil Engineers 1904

Journal: :Transactions of the Architectural Institute of Japan 1958

نمودار تعداد نتایج جستجو در هر سال

با کلیک روی نمودار نتایج را به سال انتشار فیلتر کنید