if an air flow is injected into a liquid fluid, many ambulant air bubbles are formed inside the fluid. air bubbles move inside the liquid fluid because of the buoyancy force, and the mobility of these air bubbles makes sizable commixture and turbulence inside the fluid. this mechanism was employed to enhance the heat transfer rate of a horizontal double pipe heat exchanger in this paper. howeve...

Helical coil heat exchangers are widely used in industrial applications ranging fromcryogenic processes, air-conditioning, and nuclear reactors to waste heat recovery due totheir compact size and high heat transfer coefficient. In this kind of heat exchangers, flowand heat transfer are complicated. This paper reports a numerical investigation of theinfluence of different parameters such as coil...

the present work is an experimental study of steady state convective heat transfer of de-ionized water with a (0.04% by volume) volume fraction of al2o3 nanoparticles dispersed to form a nanofluid that flows through an aluminium tube.laminar fully developed flow heat transfer coefficient of al2o3 nanoparticles are dispersed in water in circular tube is discussed in this paper. in order to valid...

the presence of particles in liquid-solid fluidized beds enhances the bed heat transfer, because the movement of the particles leads to an increased turbulence in the system. moreover, the violent movement of the particles has a positive effect on fouling of the heat transfer surface. the aim of this investigation was to perform systematic measurements of bed voidage and heat transfer coefficie...

In boilers operating in modern power plants, thick-walled elements of complex shapes, such as valves, superheater headers, T-pipes, Y-pipes, four-way pipes, and elbows, are especially prone to fatigue processes. Higher operation parameters more frequent startups may speed up damage these elements. Such is a local phenomenon caused by thermomechanical (TMF). This paper presents method designed f...

Using of nanofluids and ducts with corrugated walls are both supposed to enhance heat transfer, by increasing the heat transfer fluid conductivity and the heat transfer area respectively. Use of a diverging duct with a jet at inlet section may further increase heat transfer by creating recirculation zones inside the duct. In this work two-dimensional incompressible laminar flow of a nanofluid e...

Ejectors are a kind of pump that does not have any moving components. In certain cases, the motor fluid may be liquid, steam, or another gas. The research focuses on using nano adsorption combined with multi ejector to fuel sophisticated power plant, which is equipped three shapes steam boiler generators. simulation was accomplished by implementing it cooperation two programs MATLAB A and B, to...

the present experimental study reports on enhancement of heat transfer by addition of nanoparticles to the working fluid of commercial swimming pool heat exchangers under laminar flow condition. three different concentrations of titanium dioxide nanoparticles were added to the water as working fluid of a typical forced convective heat exchanger used to transfer heat to public swimming pools. th...

Fouling is a common, fundamental and costly problem in heat transfer systems, which reduces thermal efficiency of equipment, increases the energy loss and causes strong damage to the heat transfer equipment in various industries. The main causes of fouling on the heat transfer surfaces are salts with inverse temperature-solubility in the fluid which calcium sulfate is one of the most important ...