objectives: micromechanical retention of resin cements to alloys is an important factor affecting the longevity of metal base restorations. this study aimed to compare the bond strength and etching pattern of a newly introduced experimental etchant gel namely nano met etch with those of conventional surface treatment techniques for nickel-chrome (ni-cr) and high noble alloys.  materials and met...

PURPOSE The purpose of this report was to evaluate the effect of the fabrication method and material type on the fracture strength of provisional crowns. MATERIALS AND METHODS A master model with one crown (maxillary left second premolar) was manufactured from Cr-Co alloy. The master model was scanned, and the data set was transferred to a CAD/CAM unit (Yenamak D50, Yenadent Ltd, Istanbul, Tu...

Al-5 wt pct Si master-alloys with controlled Sr and/or P addition/s were produced using super purity Al 99.99 wt pct and Si 99.999 wt pct materials in an arc melter. The master-alloy was melt-spun resulting in the production of thin ribbons. The Al matrix of the ribbons contained entrained Al-Si eutectic droplets that were subsequently investigated. Differential scanning calorimetry, thermodyna...

Effect of carbon content on damping capacity of Fe-l7%Mn alloy is investigated by varying the carbon content from 0.02wt% to 0.28wt%. And cold rolling is conducted to examine its influence on damping capacity and mechanical properties in an Fe-17%Mn-0.02%C alloy. With the increase in carbon content, damping capacity decreases due to the area reduction of 7 / E boundaries and their mobility. Col...

A study was carried out on the aging behaviour of a solution treated 6082 aluminium alloy deformed by equal channel angular pressing up to six passes. Aging of the so obtained ultrafine alloy was studied by DSC and TEM analyses as well as by isothermal treatments at 130, 160 and 180 C. The results showed that the formation of metastable 00 and 0 precipitates were markedly anticipated and that t...

This research investigated the effect of Fe on grain refinement recycled A 356 alloy refined by Al-5Ti-1B master using macrostructure examination and chemical composition analysis. Results showed that as recycling number increased, refining performance decreased, particularly in subsequence process. The decreased concentration titanium boron were responsible for degraded A356 alloy. Appropriate...

This study evaluated the influence of water storage conditions and the effect of metal priming agents on bond strength and durability of four luting agents joined to gold alloy. Disk specimens were cast from a gold alloy (Degudent U), and the surfaces were ground flat with abrasive paper. Three surface conditions employed were: unprimed, primed with Alloy Primer, and primed with Metaltite. Thre...