Background: Electrical Discharge Machining (EDM) is a well-established non-conventional machining process for the machining of electrically conductive and difficult-to-machine materials. But its applications are limited because of the slow machining rate and poor surface finish. Powder mixed EDM (PMEDM) is unitary of the recent progresses in the EDM process in which powder particles mixed in th...

This thesis is a theoretical study of configurational disorder in icosahedral boronrich solids, in particular boron carbide, including also the development of a methodological framework for treating configurational disorder in such materials, namely superatom-special quasirandom structure (SA-SQS). In terms of its practical implementations, the SA-SQS method is demonstrated to be capable of eff...

Titanium matrix composites (TMC) represent a perspective materials category with potential applications in many important fields like aerospace constructions, automotive industry, ship structures, sports and households objects, and others. A titanium matrix composite is constituted of a titanium or titanium alloy – matrix and reinforcements materials, which are usually ceramics in form of parti...

Pure molybdenum powder was sintered using Spark Plasma Sintering under various temperatures, and holding times, under a pressure of 77 MPa and a heating rate at 700°C/min. After sintering, a carbide layer was observed at the surface. The carbide layer thickness, the relative density of the sample as well as the microhardness and the grain size of Mo were measured. The carbide thickness depends ...

The actual significance of any definition of toughness behaviour of carbide tools depends on the existence of an interrelation between the auality as defined and the occurrence of chiuninn and uremature failure in cuttin?. V'hile at ?resent there is no ademate analvsis available and the existing classifications do not even nrovide a ?ualitatiVc. indication for tool choice, one first has to eval...

Nanoparticles of Ni carbide of about 50 nm in diameter were synthesized by the reduction of Ni salt in a polyol solution in the presence of polyvinylpyrrolidone (PVP). It was found that the aggregation of nanoparticles was suppressed when PVP was added to the polyol solution during synthesis. Diffraction peaks of the fcc and hexagonal structures were observed for the specimen synthesized withou...

Cubic silicon carbide is a promising material for medium power electronics operating at high frequencies and for the subsequent growth of gallium nitride for more efficient light emitting diodes. We present a new approach to produce freestanding cubic silicon carbide (3C-SiC) with the ability to obtain good crystalline quality regarding increased domain size and reduced defect density. This wou...

Using a controllable wet chemical approach, the polyol process, we developed a cobalt carbide nanomagnet consisting of an assembly of Co2C and Co3C nanoparticles as an alternative to rare earth permanent magnets (PMs). The thermodynamically stable mixed phase cobalt carbide nanoparticles are shown to be acicular in morphology. Their exchange-coupled magnetic interaction possessing high maximum ...

background: at the end of fi xed orthodontic treatment, the remnant of adhesive should be eliminated from the tooth surface. the purpose of this study was to compare the effect of three methods of removing adhesive on enamel surface roughness, dental pulp t emperature, and also on the time spent. materials and methods: the brackets on 90 extracted teeth were debonded using bracket removal plier...