Micro/nano (two-tier) structures are often employed to achieve superhydrophobicity. In condensation, utilizing such a surface is not necessarily advantageous because the macroscopically observed Cassie droplets are usually in fact partial Wenzel in condensation. The increase in contact angle through introducing microstructures on such two-tier roughened surfaces may result in an increase in dro...

Droplets of one liquid suspended in a second, immiscible liquid move through a microfluidic device in which a channel splits into two branches that reconnect downstream. The droplets choose a path based on the number of droplets that occupy each branch. The interaction among droplets in the channels results in complex sequences of path selection. The linearity of the flow through the microchann...

Emerging technologies of net-form manufacturing and electronic packaging rely on the use of precisely deposited molten metal droplets with sizes on the order of 100 μm in diameter. In many technological realizations, closely spaced droplets are electrostatically charged and deflected onto a substrate in a manner similar to ink-jet printing in order to “print” fine features onto a board for elec...

We prepared the bioactive liquid crystal (LC) droplets by decorating an oligopeptide at the LC/aqueous interface to stabilize the LC droplets. These LC droplets can be used to detect proteases through the specific cleavage of protease on an oligopeptide leading to a bipolar-to-radial transition of LC configuration inside the droplets.

We found that by opportune functionalization of a polar dielectric substrate, a self-arrangement of hemicylindrical or toroidal-shaped liquid droplets can be obtained. The process takes place when a thermal stimulus is provided to a poled substrate whose surface is covered by an oily substance layer. Liquid droplet self-arrangement is due to the pyroelectric effect, and interferometric characte...

The possibility of producing stable oil-in-water (O/W) emulsions containing oil droplets surrounded by multiple layer interfacial membranes from food grade ingredients has been demonstrated. These emulsions were produced using a three stage process that relies on the adsorption of charged biopolymers to oppositely charged surfaces. Emulsions (0.5 wt % corn oil, 0.1 wt % lecithin, 0.0078 wt % ch...

Phase transition is a ubiquitous phenomenon in nature, science and technology. In general, the phase separation from a homogeneous phase depends on the depth of the temperature quench into the two-phase region. Earth's gravity masks the details of phase separation phenomena, which is why experiments were performed under weightlessness. Under such conditions, the pure fluid sulphur hexafluoride ...

Surface topography of medical implants provides an important biophysical cue on guiding cellular functions at the cell-implant interface. However, few techniques are available to produce polymeric coatings with controlled microtopographies onto surgical implants, especially onto implant devices of small dimension and with complex structures such as drug-eluting stents. Therefore, the main objec...