deformation length is one of the most important parameters in cold roll-forming process, which plays a fundamental role in determining the inter-distance between the stations and rate of deformation. deformation length was first introduced by bhattacharyya. he also obtained a closed-form relation for this length in roll-forming of symmetric channel section. in this paper, deformation length in ...

This paper presents the refrigerant adiabatic upward flow in the vertical header of microchannel heat exchanger and its effect on distribution. R410A is circulated into the header through the microchannel tubes (5 or 10 tubes) in the bottom pass and exits through tubes (5 or 10 tubes) in the top pass representing flow in the heat pump mode of reversible systems. Three circular headers were expl...

Quasi-static tests are performed in order to determine the crash behavior of composite tubes. The specimens are made from woven fiber carbon/epoxy. The crash experiments show that the tubes crushed in a progressive manner from one end to the other of the tubes while delamination was taking place between the layers. In the simulation works described in this paper the ANSYS explicit finite elemen...

The binding of core histones (H2A, H2B, H3, H4) to a circular plasmid DNA and to a circular DNA-RNA hybrid molecule of similar size has been compared. Circular hybrid molecules were formed from single stranded fd DNA by synthesis of the complimentary strand with ribonucleotides using wheat germ RNA polymerase II. Upon reconstitution of plasmid DNA circles with histone, the sedimentation profile...

In order to decrease the fluid dynamic forces of the U-bent tube with a circular section and avoid the occurrence of fluid-structure interaction problems, three-dimensional simulations of fluid flows around the tubes are carried out. In the case that the axis of the curved tube with the circular section is prevented from being normal to the direction of the flows approaching the tube, the forma...

Radiometric measurements of the microwave emissivity of foam were conducted in May 2000 at the Naval Research Laboratory’s Chesapeake Bay Detachment using radiometers operating at 10.8 and 36.5 GHz. Horizontal and vertical polarization measurements were made at 36.5 GHz; horizontal, vertical, +45, 45, left circular, and right circular polarization measurements were obtained at 10.8 GHz. Surface...

Heat transfer characteristics for a laminar fully developed flow in an internally corrugated circular tube with axially uniform heat flux with peripherally uniform temperature are obtained using the method of fundamental solution and the radial basis functions. The internal shape of the tube is modelled by cosine function. The nonlinear governing equation of temperature field problem was conver...

We discuss the possibility of controlling biological systems, by exciting in the near infrared region hybrid metallic nanotube ropes, dressed with proteins and embedded in the biosystems. If one nanotube, in a double-tube rope, is filled with metallofullerenes and the other is empty, the two tubes change their opposite equilibrium charging during the irradiation. The resulting change of the loc...

Recently Shukurov et al [Phys Rev E 72, 025302 (2008)], made use of nonorthogonal curvilinear coordinate system on a dynamo Moebius strip flow, to investigate the effect of stretching by a turbulent liquid sodium flow. In plasma physics, Chui and Moffatt [Proc Roy Soc A 451,609,(1995)] (CM), considered non-orthogonal coordinates to investigate knotted magnetic flux tube Riemann metric. Here it ...