chromate conversion coating is applied on aluminum 6061. the optimum conditions for chromate bath composition and immersion time are also obtained for standard requirements provision such as corrosion resistance in salt spray test, electrical resistance and coating quality. the applied coatings are electrochemically tested in sea and distilled water. according to tafel and cyclic polarization c...

The surfaces of hydoxyapatite ceramics were modified by the precipitation of octacalcium phosphate coating from aqueous solution and the biomimetic method synthesized nanohydroxyapatite coatings. Both coatings were deposited as continuous and uniform layers. It was demonstrated that the octacalcium phosphate coating was inappropriate for in-vitro osteoblast proliferation despite of good initial...

The laser diode facet damage is one of the impeding factors of the high-power laser diode operation. To overcome this restriction laser diode facet coating can be utilized. During the high power operation of the laser diode, it is observed that the single layer anti reflection (AR) coating at the front facet shows optical damage while the multilayer high reflective coating at the back facet rem...

The role of elastic mismatch in determining critical conditions for indentation fracture in brittle coatings on substrates of unlike modulus was investigated. A model transparent trilayer system, consisting of a glass coating layer bonded to a thick substrate of different glass or polymer by a thin layer of epoxy adhesive, facilitated in situ observations of crack initiation and propagation. A ...

A rigorous analysis method is provided for a rectangular slot antenna loaded by a dielectric hemisphere with double dielectric coatings. The method is an integral equation approach and the moment method solution is sought. The antenna input impedance and radiation patterns are obtained and compared with the case with a single dielectric coating layer. The bandwidth of the antenna is found to be...

A complex poly(vinylidene difluoride) (PVdF)/poly(methyl methacrylate) (PMMA) based coil coating formulation has been investigated using time-of-flight SIMS (ToFSIMS). Employing a Bi3 + analysis source and a Buckminsterfullerene (C60) sputter source, depth profiles were obtained through the polymeric materials in the outer few nanometres of the PVdF topcoat. These investigations demonstrate tha...

Self-aggregated Li4Ti5O12 particles sandwiched between graphene nanosheets (GNSs) and single-walled carbon nanotubes (SWCNTs) network are reported as new hybrid electrodes for high power Li-ion batteries. The multi-layer electrodes are fabricated by sequential process comprising air-spray coating of GNSs layer and the following electrostatic spray (E-spray) coating of well-dispersed colloidal L...

We present a dip-coatable, high-capacitance ion gel dielectric for scalable fabrication of three-dimensional (3D) electrowetting-on-dielectric (EWOD) devices such as an n × n liquid prism array. Due to the formation of a nanometer-thick electric double layer (EDL) capacitor, an ion gel dielectric offers two to three orders higher specific capacitance (c ≈ 10 μF/cm²) than that of conventional di...

By performing density functional theory (DFT)-based calculations, the performance of α-silicene as oxidation-resistant coating on Ag(111) surface is investigated. First of all, it is shown that the Ag(111) surface is quite reactive against O atoms and O2 molecules. It is known that when single-layer silicene is formed on the Ag(111) surface, the 3 × 3-reconstructed phase, α-silicene, is the gro...