Sintering of powders is a common means of producing bulk materials when melt casting is impossible or does not achieve a desired microstructure, and has long been pursued for nanocrystalline materials in particular. Acceleration of sintering is desirable to lower processing temperatures and times, and thus to limit undesirable microstructure evolution. Here we show that markedly enhanced sinter...

Absorptive characteristics of polyaniline synthesized in mixture of water and acetonitrile in 50/50 volume ratio was studied. Synthesized polyaniline in powder shape is used as an adsorbent to remove toxic hexavalent chromium from aqueous solutions. Experiments were conducted in batch mode with different variables such as agitation time, solution pH and initial concentration of hexavalent chrom...

Phosphors for luminescence thermometry La 1? x Ga 0.99 O 3 :Cr 0.01 , Nd were synthesised by the solid-state method, structurally characterised using powder X-ray diffraction data, and investigated ambient variable-temperature optical measurements.

Herbs as alternative cancer therapies have attracted a great deal of recent attention due to their low toxicity and costs. In this study, the antitumor activity and anticachectic effect of Coptidis rhizoma, an anti-inflammatory herb, were investigated in nude mice carrying a human esophageal cancer cell line YES-2, which constitutively secretes interleukin-6 (IL-6) and induces cachexia when inj...

Abstract Coatings prepared from chromia-rich (Al,Cr) 2 O 3 solid solution (ss) feedstock powders are intended to improve the properties of Cr coatings, but rarely studied so far. In this work, processability a commercial powder containing 78 wt.% by atmospheric plasma spraying (APS), corresponding coating microstructures and were investigated. Possible further improvements expected blending wit...

N-(2H-[1,2,4]thiadiazolo[2,3-a]pyridine-2-ylidene)benzamide was used as a selective sensing material in the PVC membrane to construction of a new chromium ion selective electrode. This liquid membrane electrode worked well with a Nernstian response of 19.7 ±0.4 mV decade-1 of Cr(III) in a wide dynamic concentration range of 8.0× 10-6-1.0×10-1 M. The electrode had relatively short response time ...

In this research, mechanical alloying was used to produce Ti-50Al, Ti-45Al-5Cr and Ti-45Al-5W (at%) alloys. The effect of ternary addition (Cr and W) on microstructure and production efficiency of TiAl alloy were investigated. Alloying was performed in a planetary mill and the milling time varying from 5 to 70h. The structural evaluation in these powders was done by X-ray diffraction (XRD) tech...

Red-black [HIPTN3N]Cr (1) ([HIPTN3N]3- = [(HIPTNCH2CH2)3N]3- where HIPT = 3,5-(2,4,6-i-Pr3C6H2)2C6H3 = HexaIsoPropylTerphenyl) can be prepared from CrCl3, while green-black [HIPTN3N]Cr(THF) (2) can be prepared from CrCl3(THF)3. Reduction of {1|2} (which means either 1 or 2) with potassium graphite in ether at room temperature yields [HIPTN3N]CrK (3) as a yellow-orange powder. There is no eviden...

Al assisted alloying of carbon steel in Submerged Arc Welding (SAW) by Al-Cr-Ti-Cu unconstrained metal powders is applied. A base case without powder additions compared to two addition schedules, Al-Cu-Ti and Al-Cu-Ti-Cr. used as a deoxidiser element control the oxygen partial pressure at weld pool–molten flux interface ensure that most Ti Cr transferred into pool ppm O controlled within accept...