Natural structural materials with intricate hierarchical architectures over several length scales exhibit excellent combinations of strength and toughness. Here we report the mechanical response of a crossed-lamellar structure in Cymbiola nobilis shell via stepwise compression tests, focusing on toughening mechanisms. At the lower loads microcracking is developed in the stacked direction, and c...

The California Department of Transportation uses Dowel Bar Retrofit (DBR) as a rehabilitation strategy for concrete pavements. Two test sections were dowel bar retrofitted and a third section was designated for control on US 101 near Ukiah, California. All three sections were subjected to accelerated pavement testing using the Heavy Vehicle Simulator (HVS). The HVS results demonstrated a large ...

The restoration of strength and stiffness of damaged reinforced concrete beams with deficient reinforcements, through retrofitting, was experimentally and numerically studied. Retrofitting is carried out by wrapping glass fiber strips using cement-based composite binders. Six beams of size 1500mm (length) x100mm (width) x 150mm (depth) have been tested in four-point bending. Three beams are use...

This study presents a study on the ductility performance of hybrid fibre reinforced concrete. The influence of fibre content on the ductility performance of hybrid fibre reinforced concrete specimens having different fibre volume fractions was investigated. The parameters of investigation included modulus of rupture, ultimate load, service load, ultimate and service load deflection, crack width...

Abstract To study the effects of macro- and micro-fiber on concrete beams, bending resistance tests were conducted polypropylene fiber-reinforced beams. Stepwise loaded carried out to obtain load–deflection curves for different test pieces, cracking load values first inclined crack, recording depicting crack development, changes in mid-span deflection load–strain relationships concrete, etc. Th...

an epoxy resin was modified by silica nanoparticles and cured with an anhydride. the particles with different batches of 12, 20, and 40 nm sizes were each distributed into the epoxy resin ultrasonically. electron microscopy images showed that the silica particles were well dispersed throughout the resin. tensile test results showed that young’s modulus and tensile strength increased with the vo...

STATEMENT OF PROBLEM Dental resin composites are becoming prevalent in restorative dentistry and have almost replaced amalgam nowadays. Consequently, their mechanical properties and durability are critical. OBJECTIVES The aim of this study was to produce Pyrex glass nano-particles by wet milling process and use them as reinforcement in dental resins for anterior restorations and then examinat...

To date, theoretical studies concerning the Carbon Fiber Reinforced Polymer (CFRP) strengthening of RC beams with openings have been rather limited. In addition, various numerical analyses presented so far have effectively simulated the behaviour of solid beam strengthened by FRP material. In this paper, a two dimensional nonlinear finite element analysis is presented to validate against the la...