In the present study, electrophoretic deposition (EPD) method in different electric fields (30 – 300 V / cm) was used to apply Co3O4 spinel coating to SUS 430 as SOFC interconnect. The coated and uncoated specimens were pre-sintered in air at 800 and 900 °C for 3 h followed by cyclic oxidation at 700 and 800 °C for 500 h, respectively. X-ray diffraction analysis (XRD), Scanning Electron Microsc...

Fracture modes in a model glass–polymer coating–substrate system indented with hard spheres are investigated. The large modulus mismatch between the glass and polymer results in distinctive transverse fracture modes within the brittle coating: exaggerated circumferential (C) ring cracks that initiate at the upper coating surface well outside the contact (as opposed to the near-contact Hertzian ...

This research involved the synthesizing of a reactive polymer, long alkyl quaternized poly(4-vinylpyridine) (PVP), and coating it on the surface of silica gel to produce a granular sorbent to remove Cr(VI) from water. Batch experiments were conducted to determine the kinetics, sorption isotherm, pH effects, and influence of other anions on the chromium adsorption onto the coated silica gel. The...

Chromium carbide – nickel chromium powder Cr3C2-25wt.NiCr was plasma sprayed by a water-stabilized system WSP®. A series of experiments with variable feeding distance was carried out. Basic characterization of coatings was done by XRD, SEM and light microscopy plus image analysis. Microhardness was measured on polished cross sections. The main focus of investigation was on resistances against w...

Wear tests were carried out on different DLC coatings under lubricated and dry slip-rolling friction in a Twin-Disc Testing rig. The analysis of Acoustic Emission (AE) provided an easy and comfortable tool for monitoring the wear life of DLC coatings. A DLC coating in-service was indicated by the appearance of no or just single AE events due to single damages (crack, small spallings, etc.) to t...

In this paper, the effect of microstructure on the thermal conductivity of plasma-sprayed Y2O3 stabilized ZrO2 (YSZ) thermal barrier coatings (TBCs) is investigated. Nine freestanding samples deposited on aluminum-base superalloy are studied. Cross-section morphology such as pores, cracks, m-phase content, grain boundary density of the coated samples are examined by scanning electron microscopy...

Lithium metal is the ultimate anode choice for high energy density rechargeable lithium batteries. However, it suffers from inferior electrochemical performance and safety issues due to its high reactivity and the growth of lithium dendrites. It has long been desired to develop a materials coating on Li metal, which is pinhole-free, mechanically robust without fracture during Li metal depositio...