statement of problem: biomechanics of the human dentition is inherently complex. purpose: the aim of this study is to investigate, in vitro, the creep and the recovery of dentin under static uniaxial compressive stress conditions. materials and methods: specimens of cylindrical morphology were prepared from recently extracted non-carious lower molar teeth, such that the average tubule orientati...

Creep damage is one of the serious problems for the high temperature industries and computational approach (such as continuum damage mechanics) has been developed and used, complementary to the experimental approach, to assist safe operation. However, there are no ready creep damage constitutive equations to be used for predicting the lifetime for this type of alloy, particularly for low stress...

Modelling fuel behaviour requires an accurate description of the cladding stress response for both operational and safety considerations. The transient creep response of Zirconium alloys is commonly modelled using a strain hardening rule which is known to hold in cases with monotonously increasing stresses. However, the strain hardening rule is experimentally known to fail in scenarios such as ...

Powders of MoSi 2 containing ErzMo3Si 4 and Er203 particles were produced by ball milling arc-melted buttons of MoSi 2 containing 20 vol.% Er2Mo3Si 4. Two composites with grain diameters of 9 and 16/zm were produced by hot pressing the powders to 98% of theoretical density at 1565 °C and 1650 °C respectively. Some evidence of mechanical alloying was observed, but the majority of the Er2Mo3Si 4 ...

creep phenomenon in rock engineering plays a key role in development of underground spaces as they must be stable enough for a long period of time. current research involved designing and manufacturing of a new creep testing machine. the equipment is capable to perform simultaneous light-duty creep tests on more than one cylindrical rock samples at a very low cost.to evaluate the equipment’s pe...

Strain is generated in concrete subjected to elevated temperatures owing to the influence of factors such as thermal expansion and design load. Such strains resulting from elevated temperatures and load can significantly influence the stability of a structure during and after a fire. In addition, the lower the water-to-binder (W-B) ratio and the smaller the quantity of aggregates in high-streng...

Extensive transmission electron microscopy (TEM) has been performed to study the microstructure evolution of a self-reinforced silicon nitride associated with high temperature creep. A large population of strain whorls is observed in samples crept at relatively high temperatures and the strain whorls are not necessarily asymmetrical with respect to the grain boundary normal. Large angle converg...

Abstract The paper presents a new validation study of unified rheological model, in reproducing creep strains from recent experimental performed on grade S275JR coupons. objective this research is to further test the modelling capabilities proposed model and its validity for application general structural fire engineering analysis. composed two serially connected Kelvin‐Voight elements, used re...

At high pressure prevailing in the lower mantle, lattice friction opposed to dislocation glide becomes very high, as reported in recent experimental and theoretical studies. We examine the consequences of this high resistance to plastic shear exhibited by ringwoodite and bridgmanite on creep mechanisms under mantle conditions. To evaluate the consequences of this effect, we model dislocation cr...