PURPOSE The purpose of this study was to achieve more retention and stability and to delay or prevent screw loosening. MATERIALS AND METHODS Twenty implants (Implantium 3.4 mm, Dentium, Seoul, Korea) were divided into 2 groups (n = 20). In the first group, an adhesive material was applied around the screw of the abutments (test group). In the second group, the screws are soaked in saliva (con...

BACKGROUND Strength of graft fixation is the weakest link in anterior cruciate ligament reconstruction. HYPOTHESIS There is no difference in initial fixation strength between different hamstring tendon graft femoral fixation devices. STUDY DESIGN Randomized experimental study. METHODS Each of six devices was used in the fixation of 10 quadrupled human semitendinosus-gracilis tendon grafts...

Strain-induced phase transformation and damage accumulation in austenitic stainless steel subjected to cyclic loading were investigated by nondestructive evaluation. The cyclic loading test was performed at various strain amplitudes at the same strain rate. The volume fraction of the strain-induced phase transformation (α′-martensite) was determined by ferrite scope and magnetic coercivity meas...

In this study, the performance of shred tire mixed with railway subgrade is evaluated to reduce environmental vibrations caused by trains’ passage. Since incorporating the Shred Tire seeds in soil affects on its shear strength and deformability parameters so, the first stage of the study was allocated to conducting a series of laboratory tests such as the unconfined compression test, and CBR an...

Recycled concrete aggregate (RCA) is a relatively new construction material, whose applications can replace natural aggregates. To do so, extensive studies on its mechanical behavior and deformation characteristics are still necessary. RCA is currently used as a subbase material in the construction of roads, which are subject to high settlements due to traffic loading. The deformation character...

Title of Document: A NON-LINEAR DAMAGE MODEL WITH LOAD DEPENDENT EXPONENTS FOR SOLDERS UNDER SEQUENTIAL CYCLIC SHEAR LOADS Elviz George, Ph.D., 2015 Directed By: Professor Michael G. Pecht, Department of Mechanical Engineering The damage state of a material subject to cyclic loads is often characterized by the cycle ratio of applied cycles to the number of survivable cycles. The damage in a mat...

OBJECTIVES The purpose of this in vitro study was to evaluate misfit alterations at the implant/abutment interface of external and internal connection implant systems when subjected to cyclic loading. MATERIAL AND METHODS Standard metal crowns were fabricated for 5 groups (n=10) of implant/abutment assemblies: Group 1, external hexagon implant and UCLA cast-on premachined abutment; Group 2, i...