In this study, the effects of forming method (extrusion) and environmental factors (solution pH and temperature) on the corrosion performance of AZ91 magnesium alloys were investigated using potentiodynamic polarization, electrochemical impedance spectroscopy (EIS), scanning electron microscopy (SEM) and salt spray techniques. The polarization test results of the specimens showed that simple sh...

modeling of drying kinetics of canola was studied at 30 to 100 ?c in a lab scale fluidized bed dryer. drying rate of the crop was assessed, using many conventional moisture ratio models employed in food science. effective diffusivity coefficient (deff) and activation energy (ea) of kernel moisture were determined using fick's law of diffusion and arrhenius equation. besides, the effects of...

Drying represents one of the oldest unit operations employed in industrial processes. Drying is viewed as a process of simultaneous heat and mass transfer. Porous Clay-like material undergoes stresses due to non-uniform distribution of temperature and moisture induced by heat and mass transfer respectively. The aim of this work is to simulate the stresses induced by heat and mass transfer durin...

Low-temperature incipient melting and high deformation resistance of aluminium alloy AA7075 place extraordinary demands on extrusion die design and process optimization, especially when the shape of the extrudate is complex. The present case study was aimed at combining the considerations on die design and process optimization for the alloy to manufacture a complex solid profile with large diff...

In the present work, the drying of calcium carbonate in a batch spouted bed dryer with inert particles has been investigated experimentally. The effect of several operating parameters including air temperature (90, 100, and 110 ˚C), air velocity (Ums, 1.2 Ums, and 1.5 Ums), and dry solid mass (5, 10, 20 g) has been studied. The Taguchi method has been applied to determine the optimal parameters...

in this search drying characteristics of green pea (pisum satium) with an initial moisture content of 76% (db) was studied in a fluidized bed dryer assisted by microwave heating. four drying air temperatures (30, 40, 50 and 60ºc) and five microwave powers (180, 360, 540, 720 and 900w) were adopted. at each drying operating conditions the volume of green pea was calculated by measuring the three...

An approach to producing hierarchical multi-scale porous ultra-high temperature ceramics (zirconium diboride, ZrB2) using 3D printing has been developed. Porous ceramic filaments can be printed via Direct Ink Writing (DIW) (paste extrusion). Millimeter scale porosity is created by the scaffold filaments. We introduce 20-micron-scale into with addition of oil produce capillary suspension paste i...

objective: drying is one of the most important post-harvesting processes in agriculture. drying method and also drying time have an important effect on the amount of energy required. in this study analysis of energy consumption for drying corn in dryer reservoir with flow of warm air and the effect of the temperature and height of product layer on the amount of energy consumption per unit mass ...

In the present work, the effective moisture diffusivity and activation energy were calculated using an infinite series solution of Fick’s diffusion equation. The results showed that increasing drying temperature accelerated the drying process. All drying experiments had only falling rate period. The average effective moisture diffusivity values varied from 2.807x10 to 6.977x10m s over the tempe...