Photoelectrodes for dye-sensitized solar cells were fabricated using commercially available zinc oxide (ZnO) nanoparticles and sensitized with the dye N719. This study systematically investigates the effects of two fabrication factors: the ZnO film thickness and the dye adsorption time. Results show that these two fabrication factors must be optimized simultaneously to obtain efficient ZnO/N719...

Adsorption of reactive orange 16 by quaternary chitosan salt (QCS) was used as a model to demonstrate the removal of reactive dyes from textile effluents. The polymer was characterized by infrared (IR), energy dispersive X-ray spectrometry (EDXS) analyses and amount of quaternary ammonium groups. The adsorption experiments were conducted at different pH values and initial dye concentrations. Ad...

  Background & Aims of the Study: Dyes are one of the most hazardous materials in various industries which can problems in health human, environment and ecosystem. The purpose of this study is the removal of Acid Orange 25 (AO25) diazo dye in aqueous solutions by adsorption onto clinoptilolite (CP) zeolite: study kinetic and isotherm model: experimental design and optimization. ...

Ginger waste material (GWM) has been utilized as adsorbent for removal of hazardousPatent Blue VF (PBVF) dye from aqueous solution. Batch adsorption experiments wereperformed as a function of pH, contact time, dye concentration, adsorbent dose and temperature.The optimum pH required for the maximum adsorption was found to be 2. The experimentalequilibrium adsorption data were tested using Langm...

In this study, nanoporous hydroxyapatite was synthesized and functionalized via tetraethylenepentamine in order to obtain a novel adsorbent for efficient removal of Acid Blue 25 dye from aqueous solution. Functionalized hydroxyapatite was characterized by Fourier transform infrared spectroscopy (FTIR), X-Ray Diffraction (XRD), Scanning Electron Microscopy (SEM), Energy Dispersive Spectroscopy (...

Background and purpose: Dyes are one of the main pollutants in the various industrial wastewaters. Therefore, the aim of this study was to assess the biosorption of acid red 18 dyes from aqueous solutions by brown macroalgae biomass “Sargassum glaucescens.” Materials and Methods: This research was a lab study. S. glaucescens was used as an adsorbent to remove acid red 18. The effect...

The adsorption behavior of four anionic dyes and one disperse dye in single solution and binary solutions on fly ash was investigated in order to elucidate the effect of competitive adsorption on the kinetics. The experimental findings showed that adsorption equilibriums of four anionic dyes were reached within 50 min either in the single solution or in binary mixtures. Competitive adsorption i...

the objective of this study was to assess the potential of cadmium sulfide nanoparticles loaded onto activated carbon (cdsn-ac) for the removal of sunset yellow (sy) dye from aqueous solution. adsorption studies were conducted in a batch mode varying solution ph, contact time, initial dye concentration, cdsn-ac dose. in order to investigate the efficiency of sy adsorption on cdsn-ac, pseudo-fir...

low-cost grapefruit peel (agricultural waste) was used for removal of reactive blue19 dye fromaqueous solutions. the process was studied as a function of contact time, initial dye concentration andph. adsorption process was attained to the equilibrium within 45 min for initial dye concentrations of 50,75, and 100 mg l-1. an acidic medium was the optimum condition for adsorption of dye at roomte...

Magnetic Fe3 O4 nanoparticles modified by polypyrrole (PPy@Fe3 O4 MNPs) was synthesized by chemical co-precipitation method and used as an adsorbent for removal of cationic dyes, Reactive Red195, from aqueous solutions. The resulting products are characterized by scanning electron microscope (SEM) and FT-IR. The effects of solution pH value, adsorbent amount, adsorption time and capacity of the...