Two novel triphenylamine-based thiophene derivative monomers, 4-cyano-4',4″-di(4-methoxythiophen-2-yl)triphenylamine and 4-methoxy-4',4″-di(4-methoxythiophen-2-yl)triphenylamine, were successfully synthesized. The corresponding polymers including poly (4-cyano-4',4″-di(4-methoxythiophen-2-yl)triphenylamine) and poly (4-methoxy-4',4″-di(4-methoxythiophen-2-yl)triphenylamine) were electrochemical...

The development of a Microsoft Excel spreadsheet is described, for the accurate calculation of CIE (Commission Internationale de l’Eclairage) 1931 xy chromaticity coordinates and luminance data from visible region absorption spectra recorded in transmission mode. Using firmly established CIE principles, absorbance-wavelength data from visible spectra recorded using a Hewlett Packard 8452A diode...

Despite a favourable morphology, anodized and ordered TiO2 nanotubes are incapable of showing electrochromic properties in comparison to many other metal oxide counterparts. To tackle this issue, MoO3 of ~5 to 15 nm thickness was electrodeposited onto TiO2 nanotube arrays. A homogenous MoO3 coating was obtained and the crystal phase of the electrodeposited coating was determined to be α-MoO3. T...

This paper describes the electrochromic properties of a series of poly(3,4-alkylenedioxythiophene) (PXDOT) derivatives featuring various ring sizes and substitutions. The presence of a bulky group on the monomer resulted in a polymer possessing a more-open morphology, which promoted reversible ionic transfer. We used an electrochemical quartz crystal microbalance and cyclic voltammetry to inves...

We report a battery-powered, paper-based electrochromic array for visualized electrochemical sensing. The paper-based sensing system consists of six parallel electrochemical cells, which are powered by an aluminum-air battery. Each single electrochemical cell uses a Prussian Blue spot electrodeposited on an indium-doped tin oxide thin film as the electrochromic indicator. Each electrochemical c...

Many transition metal-oxide films exhibit an electrochromic (EC) effect as they change their optical transmittance upon charge insertion or extraction. These materials may be integrated into multilayer devices, and the optical modulation is then produced by application of a small electrical voltage. Electrochromic films are therefore being developed for application in dynamic or ‘‘smart’’ windo...

A printed energy harvesting and storage circuit powered by ambient office lighting and its use to power a printed display is reported. The autonomous device is composed of three printed electronic components: an organic photovoltaic module, a carbon-nanotubes-only supercapacitor and an electrochromic display element. Components are fabricated from safe and environmentally friendly materials, an...

One of the most studied classes of materials in the modern microelectronic devices are the metal oxides. There are different metal oxide films, such as electrodes, charge injecting and electrochromic coatings for displays or “smart” windows applications. This paper aims to describe the recent achievements for oxide coating deposition for flexible electrochromic displays. Although many depositio...

A new multilayer electrochromic device has been constructed according to the following pattern: glass1/ITO/WO3/gel electrolyte/BP/ITO/glass2, where ITO is a transparent conducting film made of indium and tin oxide and with the surface resistance equal 8–10Ω/cm. The electrochromic devices obtained in the research are characterized by great (considerable) transmittance variation between coloratio...

A series of anthraquinone-imide-based dimers, C5 -AQI-Si2, C5 -AQI-Si3, C5 -AQI-Si4, and C5 AQI-Si8, have been prepared by the hydrosilylation of N-(hex-5-enyl)-6-(40-((S)-2-methylbutoxy)phenyl)anthraquinone-2,3-dicarboxylic imide and hydride-terminated siloxanes with different lengths. Their liquid crystalline behaviors, and piezochromic and near-infrared electrochromic properties have been ch...