In order to clarify the impact of Ca-binding sites (Ca1 and 2) on the conformational stability of neutral proteases (NPs), we have analyzed the thermal, pH and organic solvent stability of a NP variant, V189P/A195E/G203D/A268E (Q-mutant), from Salinovibrio proteolyticus. This mutant has shown to bind calcium more tightly than the wild-type (WT) at Ca1 and to possess Ca2. Q-mutant was resisted a...

The gas separation performance of commercial ceramic Titania and hybrid silica (HybSi®) membranes was assessed using the gas permeation and permporometry methods. Results indicated that the HybSi® membranes have a hybrid surface containing regions covered by a polymeric matrix and others with inorganic pores. These membranes have high H2 selectivity, which incre...

BACKGROUND In this work the chemical structure of dextran-iron oxide thin films was reported. The films were obtained by MAPLE technique from composite targets containing 10 wt. % dextran with 1 and 5 wt.% iron oxide nanoparticles (IONPs). The IONPs were synthesized by co-precipitation method. A KrF* excimer laser source (λ = 248 nm, τFWHM≅25 ns, ν = 10 Hz) was used for the growth of the hybrid...

The ability to mimic the structure of the natural extracellular matrix is a successful key for guided bone regeneration (GBR). For the regeneration of highly organized structures such as heart and bone, aligned fibrous membranes could provide anisotropic mechanical and biological properties which are adequate topographic guidance to cells. Here, novel nanofibrous membranes were developed throug...

One of the limiting factors in good performance of forward osmosis (FO) membranes is the internal concentration polarization (ICP). To reduce ICP, thin film nanocomposite forward osmosis (TFN-FO) membranes were fabricated by adding different amounts of graphene oxide (GO) nanoplates (0-1 wt. %) to polymer matrix of polysulfone (PSf) substrate. The prepared nanocomposite membranes exhibited both...

Poly (amide-6-b-ethylene oxide)/Zinc Oxide (PEBA/ZnO) mixed matrix membranes were fabricated using ethanol/water as solvent by solvent casting method. The concentration of ZnO in membrane was set to 0.1 wt.% and the synthesized membranes were characterized by AFM and FTIR. Effects of ZnO nanoparticle on CO2, CH4 and N2 permeabilities, and CO2/N2<...

In the present study, mixed matrix PES/zeolite nanoparticles nanofiltration membranes were prepared via the solution casting technique. The effect of zeolite concentration on the PES membrane performance and its properties was studied. Cross-sectional scanning electron microscope (SEM) observations showed that the porosity in the membrane sub-layer was increased with addition of zeolite into th...

Poly (amide-6-b-ethylene oxide)/Zinc Oxide (PEBA/ZnO) mixed matrix membranes were fabricated using ethanol/water as solvent by solvent casting method. The concentration of ZnO in membrane was set to 0.1 wt.% and the synthesized membranes were characterized by AFM and FTIR. Effects of ZnO nanoparticle on CO2, CH4 and N2 permeabilities, and CO2/N2<...

in this study, a mixed matrix polyethersulfone/iron-nickel oxide nanoparticle nanofiltration membrane was prepared by the solution casting technique. polyvinylpyrrolidone was also used as a membrane pore former in membrane fabrication. the effect of iron-nickel oxide nanoparticles concentration in the casting solution on the membrane structure and performance was investigated. scanning optical ...

BaO -SiO2-Al2O3 glass ceramics containing K2O and B2O3 were prepared using conventional melting of powered batches, quenching in water and crystallization of sintered glass. XRD patterns introducehexacelsian and celsian as two major crystallized phases in sintered glass-ceramics. Presence of K2O enhances crystallization of hexacelsianin comparison withB2O3.Observations showed sintering temperat...