Nanoscale, vanadia-based, quasi-liquid films of self-selecting (equilibrium) thickness were observed on TiO2 surfaces in six ternary oxide systems (Ti–V–X–O; X = P, Na, K, Nb, Mo or W). It is demonstrated that the film appearance and thickness could be tailored via co-doping or changing the equilibration temperature. Furthermore, the observed discontinuous changes in film thickness, hysteresis ...

The influence of the film thickness and the substrate’s refractive index on the surface mode 7 at the superstrate is an important study step that may help clearing some of the misunderstandings 8 surrounding their propagation mechanism. A single sub-wavelength slit perforating a thin metallic 9 film is among the simplest nanostructure capable of launching Surface Plasmon Polaritons on its 10 su...

To ensure bearing reliability, it is traditional for compressor manufacturers to specify a minimum oil sump temperature difference above the saturated discharge temperature in a high-side compressor and suction temperature in a low-side compressor. This minimum oil sump temperature specification is, in essence, a surrogate measure of the minimum viscosity the compressor manufacturer reqtrires t...

A non-destruction evaluation of atomically thin hexagonal boron nitride (h-BN) films is critical to the U.S. Air Force and Department of Defense initiatives pursuing graphene-based electronic field effect transistors (FETs) capable of operating at terahertz frequencies. H-BN thin films an increase to the characteristic E2g 1367cm -1 h-BN peak intensity has been correlated to an increase in film...

A fully-coupled thermoelastic model for a fixed pad thrust bearing has been developed. Pressure, film thickness and three-dimensional temperature profiles were obtained by simultaneously solving the Reynolds, film thickness, energy and force balance equations using a combined finite difference and finite element method. The elastic deformation due to the pressure and the thermal distortion due ...

The plane-strain bulge test is used to investigate the mechanical behavior of freestanding electroplated Cu thin films as a function of film thickness and microstructure. The stiffness of the films increases slightly with decreasing film thickness because of changes in the crystallographic texture and the elastic anisotropy of Cu. Experimental stiffness values agree well with values derived fro...

PURPOSE To investigate the influence of cement film thickness, cement type, and substrate (enamel or dentin) on ceramic fracture resistance. MATERIALS AND METHODS One hundred extracted human third molars were polished to obtain 50 enamel and 50 dentin specimens. The specimens were cemented to 1-mm-thick lithium disilicate ceramic plates with different cement film thicknesses (100 and 300 μm) ...

To realize a high-temperature capacitor, uniaxially (001)-oriented CaBi4Ti4O15 films with various film thicknesses were prepared on (100)cSrRuO3/Ca2Nb3O10(-) nanosheet/glass substrates. As the film thickness decreases to 50 nm, the out-of-plane lattice parameters decrease while the in-plane lattice ones increase due to the in-plane tensile strain. However, the relative dielectric constant (εr) ...

The low-temperature growth and relaxation of misfitting films are analyzed on the basis of two-dimensional molecular dynamics simulations using Lennard–Jones potentials. The temporal evolution of the surface morphology and the mechanisms for misfit dislocation nucleation and stress relaxation are monitored. Pseudomorphic film growth is observed up to a critical thickness. In some cases, the for...

   High transparent conductive indium tin oxide/titanium dioxide (ITO/TiO2) nanostructured thin film is prepared by sol-gel dip-coating technique. This method yielded monodisperse ITO nanoparticles with mean diameter of 12 nm. The atomic composition of the Sn within the ITO structure changed from 0-20 wt.%. Through controlled annealing temperature at 550 oC, the result...