The composition of the silicate portion of Martian regolith fines indicates derivation of the fines from mafic to ultramafic igneous rocks, probably rich in pyroxene. Rock types similar in chemical and mineralogical composition include terrestrial Archean basalts and certain achondrite meteorites. If these igneous rocks weathered nearly isochemically, the nontronitic clays proposed earlier as a...

The drum agglomeration of nickel laterite and gold ores has been optimized through the design of experiments (DOE) using a Taguchi L16 (45) orthogonal array to determine the optimum conditions for maximizing average agglomerate size and minimizing the amount of fines. The effects of controllable operating factors including moisture content (nickel laterite ore: 34-37%; gold ore: 7-10%), retenti...

TEMPO/NaBr/NaClO-mediated surface oxidation of NCC, acid-extracted from aspen kraft pulp, was studied, and the properties of nanocellulose whiskers before and after oxidation were characterized by conductimetry, Fourier transform infrared spectroscopy, X-ray diffraction, and atomic force microscopy. The resulting products with varied oxidation degrees were then applied in the deinked pulp to ev...

Submitted: Jul 12, 2013; Accepted: Aug 26, 2013; Published: Aug 29, 2013 Abstract: Sand production in water, oil and gas wells is usually controlled by gravel packing techniques worldwide. Consideration in the gravel pack design requires that the particle size is five or six times the formation sand depending on the formation sand median diameter. Sieve analysis result shows that the grain size...

The Texas Department of Transportation has experienced problems with inconsistent performance of the coarse aggregate fraction of hotmix asphalt pavements. This project was initiated to address problems associated with variations in hotmix coarse aggregate quality. More specifically, the researchers wanted to identify simple tests that can be performed at the aggregate quarries to assess the du...

This study assessed the issue of membrane fouling in a Hybrid Membrane Process (HMP) due to the export of powdered activated carbon (PAC) fines from a pretreatment contactor. Two parallel pilot-scale ceramic and polymeric membranes were studied. Reversible and irreversible foulings were measured following three cleaning procedures: Physical backwashing (BW), chemically enhanced backwashing (CEB...

The collection of overdue fines in state courts throughout the United States is a complex problem. Significantly, large overdue balances on many state courts' books present an ineffective judicial system to legislators and to the public. The cost of justice is extremely high and requires considerable expenditure of public funds. This project will identify a variety of techniques and tools that ...

The adsorption of polysaccharide guar gum and starch additives and their interactions with cellulosic fiber and fines, as well as soluble and colloidal carbohydrates, present in wood pulp suspensions were investigated by employing HPLC and spectrophotometry. A unique phenomenon, i.e. carbohydrate uptake or ‘substraction’, was observed to occur in a variety of cellulosic systems [whole pulp, was...

The effect of milled and micronized lactose fines on the fluidization and in vitro aerosolization properties of dry powder inhaler (DPI) formulations was investigated, and the suitability of static and dynamic methods for characterising general powder flow properties of these blends was assessed. Lactose carrier pre-blends were prepared by adding different lactose fines (Lactohale 300, 230 and ...

1 This paper presents a study to evaluate the recently developed enzymatic 2 hydrolysis test (EHT) through its repeated application to a waste treatment process. A 3 single waste treatment facility, involving a biodrying process, has been monitored using 4 three different methods to assess the biodegradable content of the organic waste fractions. 5 These test methods were the anaerobic BMc, aer...