Fired steam generators are the dominating technology of coal combustion in power plants. This paper presents a model for pulverized coal fired steam generators in Modelica. The model components are designed as an extension of SiemensPower, a Modelica library for transient simulation of power plants. The focus is on coal combustion, gas-particle-flow and radiation heat transfer in the furnace. T...

The efficiency of the application of high-emissivity coatings on the furnace walls in steam cracking technology can only be evaluated on the asis of a description of radiative heat transfer distinguishing between the frequency bands. To this end, a non-grey gas radiation model based on he exponential wide band model (EWBM) has been developed and applied in the context of three-dimensional CFD s...

Abstract Flue gas flooding is one of the important technologies to improve oil recovery and achieve greenhouse storage. In order study multicomponent flue storage capacity enhanced (EOR) performance water-alternating (flue gas–WAG) injection after continuous waterflooding in an reservoir, a long core system was built. The experimental results showed that factor gas–WAG increased by 21.25% could...

co2 emissions from combustion flue gases have turned into a major factor in global warming. post-combustion carbon capture (pcc) from industrial utility flue gases by reactive absorption can substantially reduce the emissions of the greenhouse gas co2. to test a new solvent (ait600) for this purpose, a small pilot plant was used. this paper presents the results of studies on chemical methods of...

In this work, the adsorption of carbon dioxide from model flue gas on different adsorbents has been investigated. Using simplified modeling, parameters such as the total mass transfer coefficient and the effective diffusivity have been determined. Experiments were carried out in two sections: firstly, adsorption of pure carbon dioxide on different adsorbents was measured at pressures ranging fr...

This article gives an overview of the Electric Energy Storage (EES) library, which is proposed for inclusion in the Modelica Standard Library. The library contains models with different complexity for simulating of electric energy storages like batteries (single cells as well as stacks) interacting with loads, battery management systems and charging devices. It is shown how the models are defin...

In response to the growing contribution of the trucking sector to global warming and local air quality impacts, many nations and regions around the world have developed programs and policies to improve the environmental performance of heavy-duty vehicle fleets. To date, Japan, the U.S., Canada, and China have enacted mandatory fuel efficiency or greenhouse gas (GHG) standards for new heavy-duty...

MIL-101(Cr) has drawn much attention due to its high stability compared with other metal-organic frameworks. In this study, three trace flue gas contaminants (H2O, NO, SO2) were each added to a 10 vol% CO2/N2 feed flow and found to have a minimal impact on the adsorption capacity of CO2. In dynamic CO2 regeneration experiments, complete regeneration occurred in 10 min at 328 K for temperature s...

CO2 separation using reactive solvents is considered to be a technically viable option for capturing of CO2 from flue gas streams. However, the cost of CO2 capture using conventional solvents such as aqueous solutions of monoethanolamine (MEA) is prohibitively high. Nearly half of the total cost is due to operational costs, of which about 70 to 80% can be contributed to the cost of regeneration...

The dry treatment of flue gas produced by incineration processes is discussed thermodynamically. The study investigates the theoretical limits achieved by sodium and calcium based sorbents in the removal of the pollutant species HCl, NOx and SO2. Calculations were performed varying the temperature and the molar ratio between the amount of the injected alkaline sorbent and the content of the pol...