in this paper, the effects of adding nanoparticles including tio2 to a fluid media for purpose of free convection heat transfer improvement were analyzed. the free convection was assumed to be in laminar flow regime and the solutions and calculations were all done by the integral method. water, as a newtonian fluid, was considered the base fluid (water) and all the thermo physical properties of...

in this study, mixed convection heat transfer and local and global entropy generation in aventilated square cavity have been investigated numerically. the natural convection effect isachieved by a constant heat flux imposed at the bottom wall and cooled by injecting a coldfollow. in order to investigate the effect of port location, four different placementconfigurations of the inlet and outlet ...

Experiments have been performed to assess the feasibility of cooling microelectronic components by means of single-phase and two-phase forced convection. Tests were conducted using a single heat source flush mounted to one wall of a vertical rectangular channel. An inert fluorocarbon liquid (FC-72) was circulated upward through the channel at velocities up to 4.1 m/s and with subcooling up to 4...

 The forced convection heat transfer of turbulent Al2O3-water nanofluid flow inside the grooved tubeswith the different aspect ratio of the rectangular grooves is numerically investigated. The governingequations have been solved using finite volume method (FVM) coupled with SIMPLE algorithm. It isassumed the heat flux is constant on the grooved walls. The Single-phase approach is applied for th...

This paper presents the heat transfer coefficients and the pressure drop measured during HC-600a (Isobutane) condensation inside a brazed plate heat exchanger: the effects of saturation temperature, refrigerant mass flux and vapour super-heating are investigated. The heat transfer coefficients show weak sensitivity to saturation temperature and great sensitivity to refrigerant mass flux. At low...

The integration of building Energy Simulation (ES) and Computational Fluid Dynamics (CFD) programs eliminates many assumptions employed in the separate applications, resulting in more accurate predictions of building performance. This paper discusses the methods used to determine convective heat transfer on interior surfaces of building envelope, which is the key linkage between ES with CFD pro...

a theoretical solution is presented for the forced convection heat transfer of a viscoelastic fluid obeying the giesekus constitutive equation in a concentric annulus under steady state, laminar, and purely tangential flow. a relative rotational motion exists between the inner and the outer cylinders, which induces the flow. a constant temperature was set in both cylinders, in this study. the f...

In the present research, free convection heat transfer from isothermal concave and convex body shapes is studied numerically. The body shapes investigated here, are bi-sphere, cylinder, prolate and cylinder with hemispherical ends; besides, they have the same height over width (H/D = 2). A Numerical simulation is implemented to obtain heat transfer and fluid flow from all of the geometries in a...

In this study, three-dimensional simulations are presented for laminar forced convection flow of a radiating gas over a backward-facing step in rectangular duct. The fluid is treated as a gray, absorbing, emitting and scattering medium. The three-dimensional Cartesian coordinate system is used to solve the governing equations which are conservations of mass, momentum and energy. These equations...

In this paper, the natural convection heat transfer of Al2O3-EG-water nanofluid in a rectangular cavity which is heated from the bottom and is cooled from the top has been investigated numerically. The governing equations for a Newtonian fluid have been solved numerically with a finite volume approach using the SIMPLER algorithm. The main focus of the current study is on the effects of variable...