The free vibration analysis of rotating functionally graded (FG) nano-beams under an in-plane thermal loading is provided for the first time in this paper. The formulation used is based on Euler-Bernoulli beam theory through Hamilton’s principle and the small scale effect has been formulated using the Eringen elasticity theory. Then, they are solved by a generalized differential quadrature meth...

The natural frequencies and mode shapes of pneumatic tires are predicted using a geometrically accurate, three-dimensional finite element modeling. Tire rubber materials and cord layers are represented independently using “shell element” available in COSMOS. The effects of some physical parameters such as the inflation pressure tread pattern, thickness of belts and ply angles to the natural ...

Fabrication, characterization and application of micro-/nano-rods/wires are among the hottest topics in materials science and applied physics. Micro-/nano-rod-based structures and devices are developed for a wide-ranging use in various fields of micro-/nanoscience (e.g. biology, electronics, medicine, optics, optoelectronics, photonics and sensors). It is well known that the structure and prope...

An approximate numerical mthod is presented for analysis and determination of modal characteristics in straight, pretwisted non-unifom helicopter blades. The analysis considers the coupled flapwise bending (out of plane), chordwise bending (in plane), and torsion vibration of both rotating and non-rotating blades. The proposed method is based on the integral expansion of Green functions (struct...

This paper studies free vibration of simply supported functionally graded beams with piezoelectric layers subjected to axial compressive loads. The Young's modulus of beam is assumed to be graded continuously across the beam thickness. Applying the Hamilton’s principle, the governing equation is established. Resulting equation is solved using the Euler’s Equation. The effects of the constituent...

Abstract In this paper, free vibration and transmission response for the torsional of circular annular plate are presented. To author’s knowledge, few studies can be found from wave standpoint. For purpose, in study, natural frequencies with clamped–clamped free–free boundaries calculated. The obtained by approach compared those derived classical method. Furthermore, transmissibility curves per...

Fabrication, characterization and application of micro-/nano-rods/wires are among the hottest topics in materials science and applied physics. Micro-/nano-rod-based structures and devices are developed for a wide-ranging use in various fields of micro-/nanoscience (e.g. biology, electronics, medicine, optics, optoelectronics, photonics and sensors). It is well known that the structure and prope...

a finite element analysis is presented for sloshing and impulsive motion of liquid-filled conical tanks during lateral anti-symmetric excitation. the performed analyses led to the development of a number of charts which can be used to identify the natural frequency, the mode shapes of conical tanks for both fundamental and the cos(θ)-modes of vibration. conical tank geometry was described with ...

The Hilbert Transform (HT) and its properties, applied to the analysis of linear and non-linear vibrations, are discussed at great length in [1]. The application of the HT to a signal provides some additional information about amplitude, instantaneous phase and vibration frequency. This information is valid when applied to the analysis of non-linear vibration motions [2]. Moreover, it has been ...

in the present study, vibration of cylindrical laminates with different layers and angles were studied. in order to actuate and polarize in radial direction, a piezoelectric layer was located at outer surface of composite shell. laminates were assumed long enough so that plane strain state analysis in 2d can be used properly. in order to satisfy the boundary conditions, variables in terms of fo...