The essential customer needs of today, namely long bearing service life and low noise performance, demand the availability of a means to verify that the required cleanliness level and lubrication conditions are fulfilled. To fulfil these needs, a new equipment, the SKF BEQUIET+ tester has been developed to assess the quality of the lubricant with regard to cleanliness and damping characteristic...

Biodiesel is usually produced from food-grade vegetable oils that are more expensive than diesel fuel. Therefore, biodiesel produced from food-grade vegetable oil is currently not economically feasible. Waste cooking oils, restaurant grease and animal fats are potential feedstocks for biodiesel. These inexpensive feedstocks represent one-third of the US total fats and oil production, but are cu...

The characteristics of restaurant wastewater were investigated. High oil and grease contents were detected. Electrocoagulation was used to treat this type of wastewater. Different electrode materials and operational conditions were examined. Aluminum was preferred to iron. Charge loading was found to be the only variable that affected the treatment efficiency significantly. The optimum charge l...

Abstract: Lubricating greases show a structural degradation due to friction stress. The shear process dissipates energy. This results in a breakdown of the thickener structure, heat and entropy generation. Tribo-systems are energy driven systems. The stressed lubricating grease is modeled as a subsystem and presents an open thermodynamic system. Investigations were made to obtain more informati...

This paper studies the effects of frequency, pre-strain and electrode types on the dielectric property of a commercially available and most widely used acrylic elastomer, VHB 4910. The acrylic VHB film is pre-stretched in biaxial directions with the help of an in-house developed biaxial stretching device. The stretched film has been sandwiched between two card board frames to prepare samples of...

Grease life in hybrid bearings is longer than that all-steel bearings. This will be shown this article by means of grease tests with a large number greases for both deep groove ball (DGBBs) and cylindrical roller (CRBs). The results show always larger equivalent varies between factor 2 9 depending on the type used. For bearings, does not increase decreasing speed below minimum value. However, a...

Knowledge of wheel–rail interaction is crucial to wheel and rail maintenance. In this interaction, some of the worn-off material is transformed into airborne particles. Although such wear is well understood, few studies treat the particles generated. We investigated friction modifiers' effects on airborne particles characteristics generated in wheel-rail contacts in laboratory conditions. Pin-o...

Chassis dynamometer tests were performed on seven light heavy-duty diesel trucks comparing the emissions of a California diesel fuel with emissions from four other fuels: ARCO emissions control diesel (EC-D) and three 20% biodiesel blends (one yellow grease and two soy-based). The EC-D and the yellow grease biodiesel blend both showed significant reductions in total hydrocarbons (THC) and carbo...