This paper analyzes the effective radiation efficiency of a ground-penetrating radar (GPR) consisting of two resistor-loaded bow-tie antennas covered with a ferrite-coated conducting cavity by using finite-difference time-domain (FDTD) method. The GPR is located above a lossless or lossy ground surface. The relation between the radiation powers into the ground and air, dissipated powers at the ...

In the early days of radar, range resolution was made by transmitting a short burst of electromagnetic energy and receiving the reflected signals. This evolved into modulating a sinusoidal carrier into transmitting pulses at a given repetition interval. To get higher resolution in the radars the transmitted pulses got shorter and thereby the transmitted spectrum larger. As will be shown later t...

A complete centralized processing framework is proposed for human tracking using multistatic radar in the foliage-penetration environment. The configuration of the multistatic radar system is described. Primary attention is devoted to time of arrival (TOA) estimation and target localization. An improved approach that takes the geometrical center as the TOA estimation of the human target is give...

Ground based space debris radar system utilizing a multibeam reflector antenna and digital beam-forming techniques allows a tracking of target within a large angular segment and supports the realization of an advanced Track While Scan mode characterized by a large search volume and simultaneous high detection and capture probabilities. This paper considers the concept and the main operational p...

Ground-penetrating radar (GPR) is a non-invasive geophysical technique widely used in civil engineering, archaeology and shallow geology. Radar images of the inner media provides information about inner

The description and development are described of a multidimensional continuous wavelet transform for synthetic aperture radar (SAR) image analysis, especially for the analysis of ‘dispersive’ reflectors located on a ground illuminated by a SAR. The usual imaging process makes the assumption that the reflectors are isotropic (i.e. that they behave the same way regardless of the angle from which ...

The U.S National Elevation Dataset and the NLCD 2001 landcover data were used to test the correlation between SRTM elevation values and the height of evergreen forest vegetation in the Klamath Mountains of California.Vegetation height estimates (SRTM-NED) are valid only for the two out of eight (N, NE, E, SE, S, SW, W, NW) geographic directions, due to NED and SRTM grid data misregistration. Pe...

In radar processing, multipath causes ghost targets to appear, deceiving the radar receiver. These ghosts are particularly bothersome since they move and behave like the normal targets (which they echo), and so the receiver has difficulty in isolating the correct target echo. These problems can be overcome by incorporating a ground map of the radar's surroundings and eliminating all echoes whic...

This paper discusses the potential and limitations of high-resolution P-band polarimetric synthetic aperture radar (SAR) interferometry (PolInSAR) in underlying topography estimation over forest areas. Time-frequency (TF) analysis in the azimuth direction is utilized to separate the ground scattering contribution from the total PolInSAR signal, without the use of any physical model, because the...