The coupled nonlinear partial differential equations governing the thermomechanical and axisymmetric deformations, of a cylindrical rod penetrating into a thick target, also made of a rigid/viscoplastic material, are solved by the finite element method. It is assumed that the deformations of the target and the penetrator as seen by an observer situated at the stagnation point and moving with it...

The Bauschinger effect (BE) in single crystals of Hadfield manganese steel (Fe, 12.3Mn, 1.0C in wt pct) was studied for three crystallographic orientations, [111], [123], and [001]. Both forward tensionreverse compression (FT/RC) and forward compression-reverse tension (FC/RT) loading schemes were used to investigate the role of deformation history on the BE. The evolution of stress-strain resp...

We experimentally demonstrate an exploitation of the nonlinear softening, hardening, and veering phenomena (near crossing), where the frequencies of two vibration modes get close to each other, to realize a bandpass filter of sharp roll off from the passband to the stopband. The concept is demonstrated based on an electrothermally tuned and electrostatically driven MEMS arch resonator operated ...

The damping characteristics of Ti50Ni50-xCux (x = 0~30 at.%) shape memory alloys (SMAs) at a low frequency have been studied using a dynamic mechanical analyzer. The magnitude of the tan δ value and the values of the storage modulus (E₀) softening/hardening and the strain variation exhibited in B2↔B19 transformation are all higher than those in B2↔B19' transformation. The larger E₀ softening/ha...

In this study, a Ti–33Zr–12Al–6V alloy was prepared, and its work hardening softening mechanisms were investigated via tensile tests conducted at room temperature. The interaction between the dislocations strain-induced martensite (SIM) results in hardening; whereas, shearing of grain boundaries by for entering adjacent grains softening, which occurs when logarithmic strains is 5.8% 7.6%. Work ...

A constitutive model of bulk metallic glass (BMG) plasticity is developed which accounts for finitedeformation kinematics, the kinetics of free volume, strain hardening, thermal softening, rate-dependency and non-Newtonian viscosity. The model has been validated against uniaxial compression test data; and against plate bending experiments. The model captures accurately salient aspects of the ma...

Thermomechanical deformations of a body made of two different materials and undergoing simple shearing deformations are studied with the objectives of finding out when and where adiabatic shear bands will initiate and how they will subsequently grow. Each material is modeled as strain and strain-rate hardening but thermally softening. A shear band is presumed to have formed if the introduction ...

In the field of resonant NEMS design, it is a common misconception that large-amplitude motion, and thus large signal-to-noise ratio, can only be achieved at the risk of oscillator instability. In the present paper, we show that very simple closed-loop control schemes can be used to achieve stable largeamplitude motion of a resonant structure, even when jump resonance (caused by electrostatic s...