introduction: the purpose of this study is the evaluation of the amount of surface roughness (ra) of zirconia ceramic following different surface treatments as well as the assessment of its shear bond strength to composite resin. methods: 40 sintered zirconia ceramic block samples were randomly divided in 4 groups of 10 and underwent the following surface treatments: a) control group without tr...

Abstract This paper deals with the study and development of polymer-based adhesive high filling ratio secondary raw materials waste materials. The goal this is to develop mortar highest rate as possible while preserving very physical-mechanical properties, including flexural compressive strength, pull-off bond strength abrasion resistance. High-temperature fly ash, slag packaging glass are used...

OBJECTIVES The abrasion of dentifrices is well recognized to eliminate the dental plaque. The aims of this study were to characterize the abrasive powders of 6 dentifrices (3 toothpastes and 3 toothpowders) and to measure the abrasion on a test surface by Vertical Scanning Interference microscopy (VSI). MATERIAL AND METHODS Bright field and polarization microscopy were used to identify the ab...

In heavy ion reactions, neutron production at forward angles is observed to occur with a Gaussian shape that is centered near the beam energy and extends to energies well above that of the beam. This paper presents an abrasion-ablation model for making quantitative predictions of the neutron spectrum. To describe neutrons produced from the abrasion step of the reaction where the projectile and ...

Grain size distributions in eolian settings are the result of both sorting and abrasion of grains by saltation. The two are tightly coupled because mobility of particles determines abrasion rate, while abrasion affects the mobility of particles by changing their mass and shape; few field studies have examined this quantitatively. We measured grain size and shape over a 9 km transect downwind of...

UNLABELLED BACKGROUND Excessive shoe heel abrasion is of concern to patients, parents and shoe manufacturers, but little scientific information is available. The purpose of this study was to describe the phenomenon in a group of infantry recruits performing similar physical activity, and search for biomechanical factors that might be related. METHODS Seventy-six subjects (median age 19) en...

This paper focuses on effect of abrasion process on color and reflectance factor changes of dyed woven fabrics containing 100% acrylic chenille yarns in weft and cotton warp yarns. Three fabrics having 12, 14 and 16 weft per centimeter were dyed with three basic dyes in different hues. Four different abrasion levels, i.e. 50,200,400 and 650 were selected to abrade samples. The obtained results ...

Introduction Mars is a dry planet, with actively blowing sand in many regions [1-5]. In the absence of stable liquid water and an active hydrosphere, rates of chemical weathering are slow, such that aeolian abrasion is a dominant agent of landscape modification where sand is present and winds above threshold occur at sufficient frequency. Reflecting this activity, ventifacts, rocks that have be...