Thermal remediation of the soil contaminated with crude oil using microwave heating enhanced by carbon fiber (CF) was explored. The contaminated soil was treated with 2.45 GHz microwave, and CF was added to improve the conversion of microwave energy into thermal energy to heat the soil. During microwave heating, the oil contaminant was removed from the soil matrix and recovered by a condensatio...

Nanotechnology has the potential to introduce revolutionary changes to several areas of oil and gas industry such as exploration, production, enhanced oil recovery, and refining. In this paper, the effect of different concentrations of Fe2O3 nanoparticles as a catalyst on the heavy oil viscosity at various temperatures is studied. Furthermore, the effect of a mixture of Fe2O3 nanoparticles and ...

Unconventional oils mainly heavy oils, extra heavy oils and bitumens represent a significant share of the total oil world reserves. Oil companies have expressed interest in unconventional oil as alternative resources for the energy supply. These resources are composed usually of viscous oils and, for this reason, their use requires additional efforts to guarantee the viability of the oil recove...

Strong foam can be generated in porous media containing oil, resulting in incremental oil recovery; however, oil recovery factor is restricted. A large fraction of oil recovered by foam flooding forms an oil-in-water emulsion, so that costly methods may need to be used to separate the oil. Moreover, strong foam could create a large pressure gradient, which may cause fractures in the reservoir. ...

The ultimate aim of any oil recovery operation at sea is to collect as much floating oil as is reasonably and economically possible. However, a review of past spills shows that rarely is more than 10% of spilled oil recovered from the sea surface. Although many methods of mechanical containment and recovery exist, each has its own limitations which affect the overall success of a recovery opera...

ABSTRACT: Aqueous enzymatic extraction of oil from pistacia khinjuk was performed using cellulase. The central composite design was used to optimize the parameters that are significant to the process. The influence of three regressors on the percentage of oil recovery from seed was evaluated using second-order polynomial multiple regression model. Analysis of variance showed a high coefficient ...

In recent years, many core displacement experiments of oil by seawater performed on chalk rock samples have reported SO4 2−, Ca, and Mg as potential determining ions for improving oil recovery. Most of these studies were carried out with outcrop chalk core plugs. The objective of this study is to investigate the potential of the advanced waterflooding process by carrying out experiments with re...

this study examines the effects of change in the concentrations of monovalent and divalent ions in the polymer-contained surfactant solution on the macroscopic behavior of viscous-modified surfactant waterflooding in heavy oil reservoirs. salts that are used in this set of floods were sodium chloride, magnesium chloride, and calcium chloride. the results indicate that four different ranges of s...

Increasing energy demands require improved methods for enhanced oil recovery (EOR). Chemical EOR methods are most promising for maximum oil recovery, but, so far, limited due to high costs of chemicals and environmental concerns. Therefore, there is a huge interest in optimizing procedures for chemical EOR that minimize the amount of chemicals needed and rely on natural compounds, thus decreasi...

Three different concentrations of clove oil were applied to two different size groups of singhi (Heteropneustes fossilis) and lata (Channa punctatus) fish to observe the anaesthetic effect and to find an optimum dose. Two groups each consisting of 10 fish was exposed to 0.01, 0.02 and 0.03% clove oil. All fish of either size anaesthetized with 0.01% clove oil exhibited longer induction and shor...