Creep and shrinkage are such properties that will occur in concrete when they are under load and exposed to surrounding. Since this property will cause deformation which may decrease the design strength of the concrete, it is necessary to do have more knowledge on this phenomenon. So, we will study the effect of creep on 7 and 14 days of cured time of specimens which sealed or unsealed will be ...

By incorporating lightweight expanded polystyrene aggregate particles in a conventional highstrength concrete mixture, its density could be adjusted to any desired level. The adjusted density concrete can be expected to have reduced strength and stiffness the permeability of concrete would not be affected since the non-water absorbing polystyrene aggregate particles are dispersed randomly in a ...

The subject of the investigation was the influence of pre-wetted lightweight aggregate on damage of the concrete surface due to cyclic freezing and thawing in the presence of de-icing salts tested according to the Swedish Standard SS 13 72 44 (the Borås method). Six series of concrete specimens were made with the same water/binder (w/b) ratio 0.32, cement volume 400 kg/m and content of superpla...

Internally cured (IC) concrete is frequently produced in North America using pre-wetted lightweight aggregate (LWA). One important aspect associated with the production of quality IC concrete is the accurate determination of the moisture content, including absorbed moisture and surface moisture of the LWA. Knowledge of the moisture content enables aggregate moisture corrections to be made for t...

This study evaluated the effect of macro steel fiber (SF), micro glass fiber (GF) and micro polypropylene fiber (PF) in lightweight aggregate concrete, (LWAC) beams reinforced with glass fiber reinforced polymer (GFRP) bars. Firstly, concrete mixtures with different volume fractions of GF, PF and SF were tested up to compressive strength, then determine the optimum fiber content GF, PF and SF a...