Unreinforced masonry (URM) walls strengthened with composites were tested to failure at a decommissioned building in St. Louis, Missouri. The walls were subjected to out-of-plane loading. Previous work on URM as well as reinforced masonry walls strengthened with FRP laminates has shown remarkable increases in capacity and ductility. However, most of this research work has been conducted in the ...

in this paper the traditional covering plaster of masonry buildings is supplied with polypropylene and steel fiber to enhance their seismic behavior. the plaster mix proportion is determined by some initial mortar tests. also, one story, single span masonry building specimen plastered with different mortars is tested on a shaking table 8 times under a seismic input and the performance of the sp...

This paper describes a methodology for analyzing the impulse pressure response of unreinforced concrete masonry walls that have been retrofitted with membranes that are not bonded to the masonry (catcher systems). Membrane catcher systems can be used to protect building occupants from secondary debris resulting from blast pressure, and the effectiveness of systems comprising polymers, composite...

This paper deals with the failure risk of masonry constructions under the effect of floods. It is developed within a probabilistic framework, with loads and resistances considered as random variables. Two complementary approaches have been investigated for this purpose: – a global approach based on combined effects of several governing parameters with individual weighted contribution (material ...

Mechanical behaviour of old masonry may differ from the theoretical one to a great extent, hence it needs to be properly evaluated for quantifying the safety and serviceability of real structures, in view of their rehabilitation and/or seismic reliability assessment. Among the factors affecting such behaviour, the presence of moisture, mainly from rising damp, plays a key role in the deteriorat...

The purpose of this research program is to investigate the dynamic failure properties of an unreinforced masonry panel under controlled dynamic loading conditions. This rig design is based on the classic diamond loading pattern. It is designed to achieve a uniform stress over the central area of the panel. The aim of the measurements will be to measure the rate of damage evolution in an inital ...

The majority of the building-stock from before 1900 has been erected with natural hydraulic lime-based mortars in massive masonry. Due to the low modulus of elasticity of lime-based mortars there has never been a need for dilation joints in old masonry structures. Changes in shape as a result of expansion and contraction, due to hot/cold cycles, could be “followed” by these masonry structures w...

ABSTRACT: This paper explores the behavior of infill masonry structures strengthened with a new type of Fiber Reinforced Polymer (FRP) strengthening system with high fracture strain know as PET (Polyethylene Teraphthalate) and a new near-surface mounted (NSM) Carbon fiber strengthening system using a cementitious material as the adhesive as compared to a Glass Fiber (GFRP) strengthening system ...

Masonry structures are complex systems that require a thorough and detailed knowledge and information regarding their behaviour under seismic excitations. Appropriate modelling of a masonry structure is a prerequisite for a reliable earthquake resistant design or assessment. However, modelling a real structure to a robust quantitative (mathematical) representation is a very difficult, complex a...

In unreinforced masonry walls, failure due to out -of-plane bending causes the majority of the material damages and loss of human life. Therefore, the development of effective strengthening techniques needs to be addressed. Near-surface mounted (NSM) FRP rods are now emerging as a promising technique for increasing flexural and shear strength of structural members. The aim of this research prog...