the use of agriculture residues as filler in composites is increasing due to their strength, abundance and low cost. soya stalks show promising renewable natural fiber. in polyethylene composites the physical and mechanical properties (flexural resistance, tensile, impacted absorbed energy, water uptake and thickness swelling) was examined at different composites. the results showed that, the m...

in the present study, the influence of annealing temperature on mechanical properties and the microstructure of a high manganese austenitic steel (fe-30mn-4al-4si-0.5c) was investigated. x-ray diffractometry, optical and scanning electron microscopy, hardness and tensile tests were used to analyze the relationship between mechanical properties and microstructure after annealing process. the res...

To investigate the effect of tempering treatment on mechanical properties and the microstructure of DIN 1.4021 Martensitic Stainless Steel, austenite treatment was conducted for the samples at 1000 ºC temperature for 60 min and then the samples were oil quenched. Later, tempering treatments were performed for the samples at 500 ºC and 700 ºC temperatures for 2 and 5 h, respectively; then quench...

Respiratory muscle weakness is considered to be a factor in the inability to wean from mechanical ventilation. To assess this possibility, the present study examined the mechanical behavior of the diaphragm by measuring the change in transdiaphragmatic pressure (delta Pdi) during weaning. Nine "T-piece" weanings were carried out in seven patients with prior weaning failure and were terminated w...

In this study accumulative roll bonding (ARB) process up to 8 Cycles (equivalent strain of 6.4) at ambient temperature was used in order to improve the mechanical properties of Commercial purity titanium (CP-Ti).Several experiment has been done and Mechanical properties of specimen has been discussed. For investigating optical microscope punching and hardness test were utilized. This is the fir...

In this study accumulative roll bonding (ARB) process up to 8 Cycles (equivalent strain of 6.4) at ambient temperature was used in order to improve the mechanical properties of Commercial purity titanium (CP-Ti).Several experiment has been done and Mechanical properties of specimen has been discussed. For investigating optical microscope punching and hardness test were utilized. This is the fir...

Effect of different fillers on natural rubber compounds was investigated through curing, mechanical properties and morphology studies for improving mechanical performance of rubber articles. In this work, natural rubber blends with Silica as Single-filler compounds, and blends with Silica and Carbon black as Bi-filler compounds were considered. Then, natural rubber blends with Silica, Carbon bl...