In this study, microelectro-discharge (micro-ED) milling of nonconductive ZrO2ceramicsis investigated using a Cu tool electrode in kerosene dielectric. An adhesive Cu foil is firmly attached on the workpiece to initiate the sparks. After the machining of Cu foil, an electrically conductive carbonic layer is formed on the ceramic workpiece disassociating the kerosene dielectric, which allows mic...

Understanding the flow fields at the micro-scale is a key to develop methods of successfully mixing fluids for micro-scale applications. This paper investigates flow characteristics and mixing of three different geometries in micro-channel. A Circular groove micro mixer has been designed and simulated. One such channel is shown in Figure1. The geometry of the channels taken was rectangular with...

A new hybrid cooling scheme is proposed for high-flux thermal management of electronic and power devices. This scheme combines the cooling benefits of micro-channel flow and micro-jet impingement with those of indirect refrigeration cooling. Experiments were performed to assess single-phase cooling performance using HFE 7100 as working fluid. Excellent predictions were achieved using the standa...

We experimentally demonstrate cascaded silicon micro-ring modulators as the key component of a WDM interconnection system. We show clean eye-diagrams when each of the four micro-ring modulators is modulated at 4 Gbit/s. We show that optical inter-channel crosstalk is negligible with 1.3-nm channel spacing.

In this work\ a new concept for a two!layered micro!channel heat sink with counter current ~ow arrangement for cooling of the electronic components is proposed[ The thermal performance and the temperature distribution for these types of micro channels were analyzed and a procedure for optimizing the geometrical design parameters is presented[ While the power supply system of the two!layered des...

We used continuous flow micro-devices as bioreactors for the production of a glycosylated pharmaceutical product (a monoclonal antibody). We cultured CHO cells on the surface of PMMA/PDMS micro-channels that had been textured by micromachining and coated with fibronectin. Three different micro-channel geometries (a wavy channel, a zigzag channel, and a series of donut-shape reservoirs) were tes...

The extremely small size of the micro-electromechanical systems (MEMS) makes them widely suitable for some special applications. The simplicity of the piezoelectric micro-generators is attractive for MEMS applications, especially for remote systems. In this paper, a general concept of the piezoelectric energy conversion is first given. A simple design modeling and analysis of the ‘31’ transvers...

This paper explores the two-phase cooling performance of a hybrid cooling scheme in which a linear array of micro-jets deposits liquid gradually along each channel of a micro-channel heat sink. The study also examines the benefits of utilizing differently sized jets along the micro-channel. Three micro-jet patterns, decreasing-jet-size (relative to center of channel), equal-jet-size and increas...

This is an attempt to model an unsteady peristaltic flow of micro-polar fluid in a channel of finite length. The channel is subjected to progressive sinusoidal waves that help the walls contract and relax but not expand beyond the natural boundary. It is found that the coupling number increases pressure along the entire length of the channel, while the micro-polar parameter decreases it. The co...

To investigate flow of gas mixtures through micro channel in detail, the tangential momentum accommodation coefficients of each species for gaseous mixtures were determined by analyzing the Couette flow problem of a slightly rarefied gas between two walls. The molecular dynamics (MD) method for the interaction of gas molecule with the wall surface is combined with the DSMC method for the motion...