This paper demonstrates the Dual band Broadband microstrip patch antenna with air gap for wireless applications with improved bandwidth and gain. The antenna have dual bandwidths of 860MHz (4.40GHz – 5.26GHz) or 17.61% and 1670MHz (5.33GHz – 7GHz) or 27.08% covers four bands of WLAN and one band of Wi-Max and one band of IMT. The designed antenna has four resonant frequencies 4.52GHz, 5.67GHz, ...

This paper presents a simple broadband proximitycoupled microstrip patch antenna. A circular patch is used as the main radiator, and an H-shaped shot is cut in the ground plane below the feed line. A stepped-width microstrip line is used to feed the patch through proximity coupling. By using a single patch, the prototype antenna achieves an impedance bandwidth of 26%. Low cross-polar levels bel...

This paper aim to present the design technique, parameter analysis, real prototype fabrication and measurement results compare to simulation of 5.8GHz rectangular microstrip inset feed patch antenna. The antenna design calculation, simulation study and practical measurement results are well presented and compared. This study would be useful to realize low cost 5.8GHz rectangular microstrip patc...

Microwave systems like radar, missile guidance and communication equipment which require large amplifiers to produce high power beam, wave-guides for its low loss and higher power capabilities and motors for scanning are bulky, occupy large space and are not easily routed. Most efficient replacements have been found in the active antenna array where active devices are integrated directly into t...

some analysis has been presented on a circularly polarized microstrip antenna with T slot configurations in detail. Here we will design a T-slot coupled circularly polarized microstrip antenna in the frequency 1.575 GHz. The upper patch i.e. the radiating patch would be circular. There is no closed form expression so that by using that expression the dimensions of the proposed antenna could be ...

A simple impedance matching technique for inset feed grooved microstrip patch antenna based on the concept of coplanar waveguide feed line has been developed and investigated for a printed antenna at X-Band frequency of 10GHz. The proposed technique has been used in the design of Linear Grooved Microstrip patch antenna array. The characteristics of the antenna are determined in terms of Return ...

the design of microstrip antenna for improved bandwidth and directive gain is a challenge for researchers. This paper proposes the design of a Microstrip Square-Patch antenna with enhanced Bandwidth and Directive Gain. The design and simulation of this antenna has been done with the help of Ansoft HFSS. The simulated results give significant improvement in terms of directive gain and bandwidth....

A microstrip patch antenna for WLAN application is proposed. The antenna has a frequency bandwidth of 196 MHz (5103MHz 5300 MHz). The microstrip antenna has a planar geometry and consists of a ground, a substrate, a patch and a feed. The basic theory and design are analyzed, and simulation using CST Microwave Studio commercial software is employed to optimize the antenna's properties. Results s...

In this paper the rectangular microstrip patch antenna arrays has been designed for S, C and X-band application by using the IE3D simulator. Roger RT/duroid material with dielectric constant 2.2 and height 1.588 has been used as a substrate material. Microstrip inset line feed has been used for feeding the rectangular patch antenna. Here 1x2 and 1x4 patch antenna array has been designed using s...