Formation, maintenance and repair processes of bone tissues are only possible due to the internal ability of bones to remodel their microstructure. The mechanobiological factors of tissue formation, differentiation and regeneration in bone have been investigated by many authors. Here, the simplified yet well-justified Wolff's hypothesis will be recalled, postulating that processes of remodellin...

Thermal explosion mode of combustion synthesis was used to fabricate TiAl-Al2O3 and TiAl-Ti2AlC-Al2O3 composites from elemental powder mixtures of TiO2, Al and C and characterized by XRD and Scanning Electron Microscopy (SEM) coupled with Energy-Dispersive Spectroscopy (EDS). The experimental results showed that thermite reaction of Al with TiO2 caused TiAl-Al2O3 composite formation. By adding ...

Porosity is a major concern in the production of light metal parts. This work aims to identify some of the mechanisms of microporosity formation in magnesium alloy AZ91. Microstructure analysis was performed on several samples obtained from gravity-poured ingots in graphite plate molds. Temperature data during cooling was acquired with type K thermocouples at 60 Hz at three locations of each ca...

Improvement of thermally sprayed coating properties by microstructure modification has been considered as a significant solution. Therefore, in this research the effect of dissolved oxygen content and post heat treatment on the formation and distribution of secondary phase particles, particularly in nano-scale in the coatings during spraying and after that were studied. Ni-5 wt% Al powders were...

The effects of intercritical annealing and subcritical tempering on the mechanical properties and corrosion resistance of mild steel were studied. It was revealed that intercritical annealing followed by quenching resulted in the development of a ferritic-martensitic dual phase (DP) microstructure with high tensile strength, disappearance of the yield-point phenomenon, superior work-hardening b...

The development of microstructure during melting, reactive wetting and solidification of solder pastes on Cu-plated printed circuit boards has been studied by synchrotron radiography. Using Sn-3.0Ag-0.5Cu/Cu and Sn-0.7Cu/Cu as examples, we show that the interfacial Cu6Sn5 layer is present within 0.05 s of wetting, and explore the kinetics of flux void formation at the interface between the liqu...

A data bank approach to multi-scale modelling of polymer solidification under flow and holding conditions is presented with applications to injection molding. The latent heat of solidification, which acts as an input parameter for large scale simulations, is determined as a function of different process dependent parameters such as the flow speed, supersaturation and geometric properties includ...

To investigate the effect of tempering treatment on mechanical properties and the microstructure of DIN 1.4021 Martensitic Stainless Steel, austenite treatment was conducted for the samples at 1000 ºC temperature for 60 min and then the samples were oil quenched. Later, tempering treatments were performed for the samples at 500 ºC and 700 ºC temperatures for 2 and 5 h, respectively; then quench...

We present the high-throughput fabrication technology of free-floating 3D microstructures combining fine-tuned grayscale lithography with optofluidic maskless lithography. Our system simultaneously modulated mask pattern in time phase using Digital Micromirror Device (DMD) in order to generate the different level of ultraviolet (UV) dose for photopolymerization, which causes to produce the diff...