Nowadays, magnesia carbon refractories are very important for the iron and steel industries. It is due to their unique properties, such as low wet ability with melt iron and steel. Therefore, it is important to extend the life of the refractory. In this research, the effect of calcined alumina and nano carbon on mechanical strength and corrosion resistance against slag in magnesia carbon refrac...

This study reports the synthesis of porous nano alumina employing carboxylato-alumoxanes [Al(O) x (OH) y (O2CR) z ] n as precursors for controlling the pore size, pore size distribution and porosity of the alumina, using a new process ecofriendly. The carboxylato-alumoxanes was prepared by the reaction of boehmite with carboxylic acids. The boehmite was obtained by the hydrolysis of aluminum al...

Alumina-zirconia nano-composites were recently developed as alternative bearing materials for orthopedics. Previous, preliminary reports show that such alumina-zirconia nanocomposites exhibit high crack resistance and low wear rate. In this paper, additional information is given in terms of wear, crack resistance and ageing behaviour: femoral heads are inspected after 7 million cycles of wear t...

Porous alumina templates have been fabricated by applying an exponential voltage decrease at the end of the anodization process. The time constant η of the exponential voltage function has been used to control the average thickness and the thickness distribution of the barrier layer at the bottom of the pores of the alumina structure. Depending on the η value, the thickness distribution of the ...

Small-scale concentration of viruses (sample volumes 1-10 L, here simulated with spiked 100 ml water samples) is an efficient, cost-effective way to identify optimal parameters for virus concentration. Viruses can be concentrated from water using filtration (electropositive, electronegative, glass wool or size exclusion), followed by secondary concentration with beef extract to release viruses ...

abstract : alumina (al 2 o 3 ) is one of the most practical ceramics used in making ceramic-metal armours. to improve the properties of alumina, some other materials are added to it. in this paper, sic material as nano powder is added to alumina, and four armour samples of this new ceramic with different volume fractions (v.f. ) including 0%, 5%, 10% and 15% of sic particles are made. then, the...

In this review, we will discuss our recent approaches for the formation of mechanically stable bilayer lipid membranes (BLMs) by combining with BLM formation and micro- and nano-fabrication techniques. BLMs were prepared across a microaperture fabricated in silicon (Si) chips or nanoporous alumina films using a minimized amount of organic solvent. Although BLMs spanned over the porous alumina f...

Uniform arrays of nano-sized pore produced in porous alumina were transferred into InP substrates by inductively coupled plasma reactive ion etching (ICP-RIE). We observed a significant enhancement in the light output from InP substrate with nanohole arrays on the surface. Photoluminescence intensity of triangular arrays of air cylinders on InP substrate showed an enhancement up to 3 times comp...

In this paper, the shape memory, mechanical and Izod impact properties of a new shape memory nanocomposite based on thermoplastic polyurethane (TPU), acrylonitrile butadiene styrene (ABS) and alumina nanoparticles were investigated. The morphological results showed that the presence of 1% alumina nanoparticles made a reduction in diameter of ABS domains and caused a uniform distribution of the ...