The present study examined the gas-phase photocatalytic degradation of toluene using ZnO-SnO2 nanocomposite supported on activated carbon in a photocatalytic reactor. Toluene was selected as a model pollutant from volatile organic compounds to determine the pathway of photocatalytic degradation and the factors influencing this degradation. The ZnO-SnO2 nanocomposite was synthesized through co-p...

Optical structures fabricated on silicon-on-insulator technology provide a convenient platform for the implementation of highly compact, versatile and low cost devices. In this work, we demonstrate the promise of this technology for integrated low power and low cost optical gas sensing. A room temperature ethanol vapor sensor is demonstrated using a ZnO nanoparticle film as a coating on an SOI ...

Nano-sized ZnO catalysts were prepared by a direct precipitation method under the optimal conditions (calcination of precursors at 550 ̊C for 120 min). The as-synthesized ZnO catalysts were characterized by X-ray diffraction (XRD), scanning electron microscope (SEM) and UV-Vis spectroscopy. The photocatalytic properties of ZnO nanoparticles were investigated via methyl orange (MO) as a model org...

the objective of this research is characterizing the effect of nano-zinc oxide (nano-zno) dispersions on leach resistance and contact angle of beech wood (fagus orientalis lipsky). the beech wood was cut into standard dimension, and oven dried after treating with nano-zno solution, based on immersion method. three treating nano-zno solution levels: (o, 20000 and 40000 ppm), and two thermal trea...

Here, in situ synthesis of nano zinc oxide, along with aminolysis of polyester fabric, has simultaneously been carried out by using triethanol amine (TEA) and zinc acetate. The ZnO nano particles (NPs) were formed and stabilized on the fabric surface by amine compound at 130 °C for 1 h. The synthesis of nano ZnO particles on the polyester fabric were confirmed by X-ray diffraction (XRD) pattern...

A novel method of preparing the macrporous nickel coating was described. The macrporous nickel coating was fabricated by employing nano-silica as the template. The effects of technological conditions and the concentration of the additives on the surface quality of coating were investigated, the nano-silica was characterized transmission electron microscopy (TEM) and laser particle size analyzer...

Seed mediated aqueous chemical growth (ACG) route was used for the growth of ZnO nanostructures on Si substrate in four different growth mediums. The growth medium has shown to affect the morphology and the size of the different nanostructures. We observed that the medium containing zinc nitrate anions yields the nanorods, in a medium containing zinc acetate anions nano-candles are obtained. Wh...

In this research, nanoimprint lithography (NIL) was used for patterning crystalline zinc oxide (ZnO) nanorods on the silicon substrate. To fabricate nano-patterned ZnO nanorods, patterning of an n-octadecyltrichlorosilane (OTS) self-assembled monolayers (SAMs) on SiO2 substrate was prepared by the polymer mask using NI. The ZnO seed layer was selectively coated only on the hydrophilic SiO2 surf...

The crevice correction is a common type of localized corrosion which costs multibillion dollar losses in many different fields including aerospace, automobile, and building structures. The crevice geometry can easily catch moisture and impurity which accelerates the chemical corrosion. It is one of the dangerous corrosions that can cause sudden failure of the products and involve the human inju...