supersonic separators have found extensive applications in dehumidification of natural gases since 2003. unlike previous studies, which have investigated the inlet conditions and nozzle geometry of supersonic separators for pure fluids, the present study employed a combination of momentum, heat, and mass transfer equations along with virial equation of state (eos) to inspect the effect of inlet...

A conventional, axial‐flow, air‐blast orchard sprayer was used to make applications to the outside row of a semi‐dwarf apple block. Fluorescent tracer was applied at the same rate using either disc‐core nozzle sets or air‐induction nozzles fitted with flat‐fan tips. The experiment included measuring the percent area of spray coverage on leaves after three variations in spray application method....

A planar and instantaneous visualization study of high-speed gas jets and their airblast sprays was performed to qualitatively examine the different atomization performances of different gas nozzles. For the visualization of high-speed gas jets (with no liquid injected), Nd:YAG pulsed laser sheets imaged the clustered vapor molecules in the Rayleigh range (d@j), condensed from the natural humid...

Production of drug nanoparticles is an effective strategy to enhance solubility and oral absorption of water-insoluble drugs. The handling of drug nanoparticles has been an important issue in drug formulation because nanoparticles easily aggregate each other and redispersion of these particles is very difficult. In the present study, we developed a unique two-solution mixing type spray nozzle t...

The two-phase ejector refrigeration cycle (TPERC) system with a two-throat nozzle ejector was investigated experimentally, and the entrainment ratio of the ejector and the COP of the system were compared with those of the ejector with Laval nozzle and its TPERC system respectively. The experimental results indicate that under the working condition of the evaporating/condensing temperatures 1°C/...

The objective of this paper is to computationally analyse shock waves in the Convergent Divergent (CD) Nozzle. The commercial CFD code Fluent is employed to analyse the compressible flow through the nozzle. The analysis includes static pressure, temperature, Mach number and density of the flow for different nozzle pressure ratios (NPR i.e., the ratio between exit pressure of the nozzle to ambie...

A system of models has been developed to study transient flow during continuous casting and applied to simulate an event of multiple stopper-rod movements. It includes four sub-models to incorporate different aspects in this transient event. A three-dimensional (3-D) porous-flow model of the nozzle wall calculates the rate argon gas flow into the liquid steel, and the initial mean bubble size i...

This research aims to study jet downstream scour model under the influence of changes of water level. It also studies and analyzes different parameters and components of diffusion of submerged jet flow in an acceptor fluid and scour hole dimensions. To achieve the objectives, a physical model was made in proportion to the research title. With the Froude number increasing in a nozzle discharge, ...

Single-phase turbulent flow in a 0.4-scale water model of a continuous steel caster is investigated using large eddy simulations (LES) and particle image velocimetry (PIV). The computational domain includes the entire submerged entry nozzle (SEN) starting from the tundish exit and the complete mold region. The results show a large, elongated recirculation zone in the SEN below the slide gate. T...