Volumetric visualization has many practical applications, particularly in medical imaging. Usability of volumetric visualization algorithms depends on available means to select areas of interest in volumetric data that are to be visualized. A simple and sufficient method is a onedimensional transfer function that assigns colours to intensity values of the data. A drawback of this method is that...

Separation of formic, acetic, and propionic acids from the aqueous stream using membrane solvent extraction has been studied using three different membrane contactors made of polysulfone (PS), polyethersulfone (PES), and polyvinylidene fluoride (PVDF) using two different solvents; including ethyl acetate (EA) and diisopropyl ether (DIPE). The efciency of the membrane and e...

The production of low-cost cellulase enzyme is a key step in the development of an enzymatic-based process for conversion of lignocellulosic biomass to ethanol. Although abundant information is available on cellulase production, little of this work has examined oxygen transfer. We investigated oxygen transfer during the growth of Trichoderma reesei, a cellulase-producing microorganism, on solub...

Measurements of soil volumetric moisture content and temperature were made at 2, 4, 7, 10, and 15 cm below the surface of a bare field soil, over a 1-week period at 20-min intervals. The conductive heat and liquid moisture fluxes were calculated for the soil layer 7–10 cm below the surface, and the water vapor flux was then determined from both the energy transfer and mass transfer equations. W...

Effect of fractional gas hold-up εG on volumetric mass transfer coefficient KLa were studied for two different type of airlift contactors conventional and modified. KLa was directly proportional to gas hold-up within bubbly flow regime (UG < 0.075 m/s ) in conventional one but reverse trend ( inversely proportional) was reported in modified airlift contactor. Mathematical relation between KLa a...

the kinetic of the heterogeneous chemical reaction of aluminum hydroxide and fluosilicic acid was studied. it was found that the diffusion of the reactants through the porous silica coating to the aluminum hydroxide surface and the interfacial chemical reaction between the diffusing reactant and aluminum hydroxide platelets control the overall reaction rate. these two phenomena were studied and...