We present a strategy to identify energetically favourable oxide structures in thin-film geometries. Thin-film candidate configurations are constructed from a pool of sublattices of stable and metastable oxide bulk phases. Favourable stoichiometric compositions and atomic geometries are identified by comparing total and Gibbs free energies of the relaxed configurations. This strategy is illustr...

Tin oxide thin film deposited on to glass substrates by the process of DC reactive magnetron sputtering has been used in our work. These films were characterized for their thermoelectric behavior. Further, a novel method has been developed to enhance the Seebeck coefficient of these films. Prior to the oxide film deposition on the glass substrate, thin metal films have been deposited at the two...

We report an x-ray photoelectron spectroscopy study of the oxidation of Al(111) surfaces at room temperature, which reveals that the limiting thickness of an aluminum oxide film can be tuned by using oxygen pressure. This behavior is attributed to a strong dependence of the kinetic potential on the oxygen gas pressure. The coverage of oxygen anions on the surface of the oxide film depends on th...

We present a titanium-silicon oxide film structure that permits polarization modulated infrared reflection absorption spectroscopy on silicon oxide surfaces. The structure consists of a ~6 nm sputtered silicon oxide film on a ~200 nm sputtered titanium film. Characterization using conventional and scanning transmission electron microscopy, electron energy loss spectroscopy, X-ray photoelectron ...

The present study aimed at morphological and chemical characterization of the coating-substrate interface of a commercially available dental implant coated with plasma-sprayed hydroxyapatite (HA). For this purpose, elements in the chemically and mechanically exposed substrate surfaces were analyzed by EPMA and XPS. A thin titanium oxide film containing Ca and P was found at the interface. When ...

A first-principles account of the observed limiting thickness of oxide films formed on aluminum during oxidizing conditions is presented. The results uncover enhanced bonding of oxygen to thin alumina films in contact with metallic aluminum that stems from charge transfer between a reconstructed oxide-metal interface and the adsorbed molecules. The first-principles results are compared with the...

A new electrofluorescent switch was prepared with an electroactive fluorescent tetrazine blend of polymer electrolyte; the cells contain four layers: the tetrazine polymer film, a photocured polymer electrolyte film, and two indium-tin oxide plates as the two contact electrodes.

— Tantalum oxide (Ta 2 O 5) films are of considerable interest for a range of application, including optical waveguide devices, high temperature resistors, and oxygen sensors. In this paper, we establish an anode oxidation process of tantalum thin film. The voltage drop in the electrolyte is affected not in voltage change but in current change. If the voltage drop in the electrolyte is same wit...

We demonstrate for the first time that a single-crystalline epitaxial MgxCa1-xO film can be deposited on gallium nitride (GaN) by atomic layer deposition (ALD). By adjusting the ratio between the amounts of Mg and Ca in the film, a lattice matched MgxCa1-xO/GaN(0001) interface can be achieved with low interfacial defect density. High-resolution X-ray diffraction (XRD) shows that the lattice par...

nanocrystalline titanium (iv) oxide paste has been deposited on fluorine doped tin oxide glass substrate by the blade method. the deposited film was subjected to thermal treatment to obtain an electrode foe a photo-electrochemical cell. the electrode was sensitized with prophyrin dye which was a local dye extracted from carica papaya leaves. avaspec 2.1 spectrophotometer was used to obtain the ...