production of fe-c alloy powders by mechanical alloying was studied. fe and graphite elemental powdermixtures containing 0.8 and 1.5wt.% graphite were mechanically alloyed using a planetary ball mill. thestructural changes of powder particles during mechanical alloying were studied by x-ray diffractometery,scanning electron microscopy and microhardness measurements. for both compositions, mecha...

particle size, board density and adhesive content are the most important factors, influencing on physical and mechanical properties of particleboard. in this study the effects of density, adhesive content and particle size on withdrawal strength of particleboard made from populus (populus alba) particles have been studied. three levels of density including 0.65, 0.7, and 0.75 g/cm3, three level...

Polystyrene resins with varied particle sizes (35 to 350-600 microm) and pore diameters (300-1000 A) were employed to study the effects of immobilization resin particle size and pore diameter on Candida antarctica Lipase B (CALB) loading, distribution within resins, fraction of active sites, and catalytic properties for polyester synthesis. CALB adsorbed rapidly (saturation time </= 4 min) for ...

The article describes the development and production of tablets using direct compression of powder mixtures. The aim was to describe the impact of filler particle size and the time of lubricant addition during mixing on content uniformity according to the Good Manufacturing Practice (GMP) process validation requirements. Processes are regulated by complex directives, forcing the producers to va...

Objective(s):Iron oxide nanoparticles have found prevalent applications in various fields including drug delivery, cell separation and as contrast agents. Super paramagnetic iron oxide (SPIO) nanoparticles allow researchers and clinicians to enhance the tissue contrast of an area of interest by increasing the relaxation rate of water. In this study, we evaluate the dependency of hydrodynamic si...

Correlation between traffic density and particle size distribution in a street canyon and the dependence on wind direction J. Voigtländer, T. Tuch, W. Birmili, and A. Wiedensohler Leibniz Institute for Tropospheric Research, Leipzig, Germany UFZ Center for Environmental Research, Department of Human Exposure Research and Epidemiology, Leipzig, Germany Received: 14 February 2006 – Accepted: 6 Ma...

One strategy for treating coronary artery disease (CAD) patients with low HDL cholesterol (HDL-C) is to maximally increase the HDL-C to LDL-C ratio by combining lifestyle changes with niacin (N) plus a statin. Because HDL can prevent LDL oxidation, the low-HDL state also may benefit clinically from supplemental antioxidants. Lipoprotein changes over 12 months were studied in 153 CAD subjects wi...