In this study buckling analysis of solid rectangular plate made of porous material bounded with the layers of piezoelectric actuators in undrained condition is investigated. Porous material properties vary through the thickness of plate with a specific function. Distributing of the pores through the plate thickness is assumed to be the nonlinear nonsymmetric distribution. The ...

We consider in this paper the design and implementation of a dual-stage actuated hard disk drive (HDD) servo system, in which an additional piezoelectric actuator is mounted on top of the conventional voice-coil-motor (VCM) actuator to provide a faster and finer response. More specifically, the dual-stage actuated HDD servo system consists of a primary VCM actuator and a secondary suspension pi...

An efficient spectral element (SE) with electric potential degrees of freedom (DOF) is proposed to investigate the static electromechanical responses of a piezoelectric bimorph for its actuator and sensor functions. A sublayer model based on the piecewise linear approximation for the electric potential is used to describe the nonlinear distribution of electric potential through the thickness of...

This paper presents a method for predicting the power consumption of piezoelectric actuators utilized for active vibration control. Analytical developments and experimental tests show that the maximum power required to control a structure using surface-bonded piezoelectric actuators is independent of the dynamics between the piezoelectric actuator and the host structure. The results demonstrate...

A novel model is described for predicting the static behavior of a piezoelectric cantilever actuator with an arbitrary configuration of elastic and piezoelectric layers. The model is compared to deflection measurements obtained from 500m-long ZnO cantilever actuators fabricated by surface micromachining. Modeled and experimental results demonstrate the utility of the model for optimizing device...

1.1 Ultra-precision moving positioning stage A typical ultra-precision moving positioning stage is often used in ultra-precision manufacturing system for its nanometer displacement and fast linear moving speed. Usually, such platform consists of electric amplifiers, piezoelectric actuators and loads. As hysteresis is inherent in piezoelectric actuator, the amplifier and load can be considered a...

We present three novel mechanical laser shutter designs based, respectively, on a stepper motor, a relay, and a piezoelectric actuator. Each shutter type is ideally suited to a specific shuttering application. The stepper motor is well suited for applications requiring low vibrations, the relay is compact and capable of rapid bursts, and the piezoelectric is 2 orders of magnitude faster than ot...

This study analyses the possibility of reprocessing used poly(vinylidene fluoride), PVDF, maintaining the main properties critical for its use in piezoelectric sensor/actuator applications. The influence of multiple reprocessing cycles of PVDF on crystallinity and ß-phase content fundamental for its electroactive behaviour, was studied. Nine reprocessing cycles were completed and it was found t...

A new type of rotary motor by inchworm motion using two belts is developed. A rotor is wrapped by two opposite belts which are connected to piezoelectric actuators. A serial lever structure with flexure hinges is used to connect a belt and piezoelectric actuators. The lever structure amplifies micro displacement of a piezoelectric actuator. A rotational motion with the step size of 2.36 mrad is...

A piezoelectric voltage coupled microwave reentrant cavity has been developed. The central cavity post is bonded to a piezoelectric actuator allowing the voltage control of small post displacements over a high dynamic range. We show that such a cavity can be implemented as a voltage tunable resonator, a transducer for exciting and measuring mechanical modes of the structure, and a transducer fo...