Electronic devices using the piezoelectric effect contain piezoelectric materials: often crystals, but in many cases poled ferroelectric ceramics (piezoceramics), polymers or composites. On the one hand, these materials exhibit non-negligible losses, not only dielectric, but also mechanical and piezoelectric. In this work, we made simulations of the effect of the three types of losses in piezoe...

A highly topical set of perovskite oxides are high-sensitivity piezoelectric ones, among which Pb(Zr,Ti)O3 at the morphotropic phase boundary (MPB) between ferroelectric rhombohedral and tetragonal polymorphic phases is reckoned a case study. Piezoelectric ceramics are used in a wide range of mature, electromechanical transduction technologies like piezoelectric sensors, actuators and ultrasoun...

A kind of piezoelectric ink was prepared with Li, Ta, Sb co-doped (K, Na)NbO₃ (KNN) powders. Piezoelectric scaffolds with diameters at micrometer scale were constructed from this ink by using direct ink writing method. According to the micro-morphology and density test, the samples sintered at 1100 °C for 2 h have formed ceramics completely with a high relative density of 98%. X-ray diffraction...

Abstract The intrinsic conduction mechanism and optimal sintering atmosphere of (Ba 0.85 Ca 0.15 )(Zr 0.1 Ti 0.9 )O 3 (BCZT) ceramics were regulated by Mn-doping element in this work. By Hall impedance analysis, the undoped BCZT exhibit a typical n-type mechanism, electron concentration decreases with increasing oxygen partial pressure. Therefore, best electrical properties (piezoelectrical con...

The structural, dielectric and piezoelectric properties were tailored by a single step processing, 'thermal etching’ their correlation in Aurivillius ABi 4 Ti O 15 (A = Sr, Ba) functional ceramics investigated.

(Bi0.5Na0.5)0.94Ba0.06TiO3 dense ceramics were obtained from autocombustion sol-gel synthesized nanopowders and sintered at 1050 ◦C for 1–2 h for the study of the electromechanical anisotropy. Measurement of the complex impedance spectrum was carried out on thin ceramic disks, thickness-poled, as a function of the temperature from 16 ◦C up to the vanishing of the electromechanical resonances at...

The results of practical implementation of a new method for porous piezoceramics, and ceramic matrix piezocomposites fabrication were presented. The method was based on nanoparticles transport in ceramic matrices using a polymer nanogranules coated or filled with a various chemicals, with successive porous ceramics fabrication processes. Different types of polymer microgranules filled and coate...

2014 We study the behaviour of piezoelectricity in highly heterogeneous media. The piezoelectric effect introduces a coupling between electrical and mechanical properties, which have separately different scaling behaviours. Its study therefore constitutes a priori an interesting question. This problem is also suggested by the recent development of low-density, porous piezoelectric ceramics whic...

xBaZrO3-(1!x)BaTiO3 solid solutions (x 1⁄4 0, 0.04, 0.06, 0.08, 0.12, and 0.18) synthesized via conventional solid state reaction method exhibit piezoelectric coefficients comparable to those of “hard” PZT-8, PZT-4, and even “soft” PZT-5A. Doping also improves the poling efficiency of xBaZrO3-(1!x)BaTiO3 ceramics. Study of temperature dependence of the dielectric and piezoelectric properties re...

Submicrometer-structured (Bi(0.5)Na(0.5))(0.94)Ba(0.06)TiO(3) ceramics ((G) < 720 nm) from nanopowders were studied. The real part of the optimum room temperature set of piezoelectric coefficients obtained from resonances of the BNBT6 dense ceramic disks and shear plates [d(31) = (-37 + 1.33i) pC·N(-1), d(15) = (158.3 - 8.31i) pC·N(-1), k(t) = 40.4%, k(p) = 26.8%, and k(15) = 40.2%] and d(33) (...