Light-weight and high strength alloys such as Al-Mg alloys are used in order to reduce the weight of industrial components. However these materials should be formed at elevated temperatures due to their poor formability at room temperature. Hot metal gas forming is one of the high-tech forming processes that is used to solve this problem. Recent investigation on tube hydroforming showed positiv...

Light-weight and high strength alloys such as Al-Mg alloys are used in order to reduce the weight of industrial components. However these materials should be formed at elevated temperatures due to their poor formability at room temperature. Hot metal gas forming is one of the high-tech forming processes that is used to solve this problem. Recent investigation on tube hydroforming showed positiv...

The vortex-ingesting stirred tank reactor uses a combination of a helical screw impeller and concentric draft-tube to entrain and recycle headspace gas and disperse it as bubbles in a liquid reaction solvent. This study presents an experimental characterisation of a 0.29 m diameter vortex-ingesting gas-liquid stirred reactor, operated with solids mass fractions from 0 to 25%, over a range of sp...

  In this paper, modeling and optimization of Fischer-Tropsch Synthesis is considered in a fixed-bed catalytic reactor using an industrial Fe-Cu-K catalyst. A one dimensional pseudo-homogenous plug flow model without axial dispersion is developed for converting syngas to heavy hydrocarbons. The effects of temperature, pressure, H2 to CO ratio in feed stream, and CO molar flow on the mass flow r...

The oxidation of pentan-2-ol was investigated at high-pressure in a jet-stirred reactor and shock tube. Experiments the JSR were carried out 10 atm, between 500 1180 K, for five different equivalence ratios ? = 0.35, 0.5, 1, 2, 4 1000 ppm fuel, constant residence time 0.7 s. Reactant, product intermediate species mole fractions quantified using Fourier transform infrared spectrometry (FTIR) gas...

in this paper, modeling and optimization of fischer-tropsch synthesis is considered in a fixed-bed catalytic reactor using an industrial fe-cu-k catalyst. a one dimensional pseudo-homogenous plug flow model without axial dispersion is developed for converting syngas to heavy hydrocarbons. the effects of temperature, pressure, h2 to co ratio in feed stream, and co molar flow on the mass flow rat...

Abstract A detailed chemical kinetic model for oxidation of CH3CHO at intermediate to high temperature and elevated pressure has been developed evaluated by comparing predictions novel high-pressure flow reactor experiments as well shock tube ignition delay measurements jet-stirred data from literature. The were conducted with a slightly lean CH3CHO/O2 mixture highly diluted in N2 600–900 K pre...

Thin-walled tube bending is still to be considered a new and advanced technique. The process has been adopted into several industries such as aero and automotive. This process may produce a wrinkling, bulking and tearing phenomenon if the process parameters are inappropriate, especially for tubes with large diameter and thin wall thickness. Push bending process is one of the methods used for be...