Introduction: Well type ionization chamber is a measuring device which is used to determine the activity of brachytherapy sources. The chamber has a cylindrical volume in which a cylindrical tube is mounted in the middle of the chamber. For the measurements, the brachytherapy sources are transferred to the middle of the tube. Materials and Methods: For designing the well type chamber, the measu...

Processing nematodes for scanning electron microscopy requires transfer of specimens through a series of fixatives and dehydrat ion fluids (1, 2). Preferably, all steps of fixation, dehydration, and drying are performed in the same vessel to avoid repeated handling of specimens. De Grisse (2) described small chambers made of nylon mesh and glass tubing for this purpose, and Marchant (3) constru...

A pulsed arc heater was designed and manufactured at Centrospazio to equip a new hypersonic high-enthalpy blow-down wind tunnel capable of producing flows with a specific total enthalpy up to 2.5 MJ/kg. The heater mainly consists of two coaxial electrodes, separated by a constrictor, and a plenum chamber. The flow is heated by an electric arc ignited between the electrodes and sustained by the ...

A common problem observed in aged coke plants is the increase pushing load during discharge of mass, arising from irregularities on damaged coking-chamber walls. Usually, chamber wall partially covered with adhered carbon. Because carbon growth influenced by a number factors, has complicated adhesion distribution, and amount carbon-covered area differs to chamber. Carbon locally affects both po...

A DC micro plasma jet for local micro deposition of a:C-H film in the ambient vacuum of scanning electron microscope (SEM) chamber is proposed. Acetylene (C2H2) gas was locally fed into the chamber through an orifice shaped gas nozzle (OGN) at 6.6 sccm in flow rate by applying 80 kPa-inlet pressure with an additional direct pumping system equipped on the SEM chamber. As a cathode, a cut of n-ty...

Larvae of Psychoda and of Chironomus (diptera) maintained in solutions of appropriate indicators show that the typical acidities (pH) prevailing within the several regions of the digestive tract are: esophagus 7.1; cardiac chamber 6.2; mesenteron 7.5; the latter being functionally an intestine. The acidity of the hindgut, pH 6.4, is due to the discharge of the malphigian tubules.

The aeroderivative gas turbine is widely used as it demonstrates many advantages. Adding hydrogen to natural fuels can improve the performance of combustion. Following this, effects enrichment on combustion characteristics were analyzed in an combustor using CFD simulations. numerical model was validated with experimental results. conditions constant mass flow rate and energy input studied. res...

One of the great challenges in the processing of materials using Equal Channel Angular Pressing (ECAP) is the high forming forces required to produce large shear deformation in the material. Researchers show that the friction forces between the die and the sample constitute a great part of the total forming forces. Recently, ultrasonic vibrations are successfully implemented into the ECAP proce...

Abstract A helicon plasma source has been designed using annular permanent magnets to produce the required DC magnetic field (B-field). With the discharge tube located in the remote field, rather than the internal field of the magnet rings, the plasma can be injected into a processing chamber containing the substrate to be treated. The discharge tube, radiofrequency (RF) antenna and magnet size...

This paper reports on an experimental study of the influence of a nanosecond repetitively pulsed spark discharge on the stability domain of a propane/air flame. This flame is produced in a lean premixed swirled combustor representative of an aeronautical combustion chamber. The lean extinction limits of the flame produced without and with plasma are determined and compared. It appears that only...