The effects of prior stored energy level, annealing temperature, heating velocity, and initial grain size on annealing twin development during static recrystallization of commercially pure nickel (99.999 %) are investigated. The twin content (measured as the twin boundary density or as the number of twins per grain) at the end of recrystallization is shown to be primarily influenced by the prio...

Plasma-facing components of future fusion reactors will have tungsten-based materials as armor. Annealed pure tungsten is brittle at room temperature restricting its use plasma-facing material, whereas plastically deformed behaves in general more ductile ambient temperatures. During operation material high temperatures, the deformation structure induced by plastic becomes unstable. Restoration ...

Deformation behaviors during cold rolling and static recrystallization upon subsequent annealing of an extruded WE43 alloys with different initial textures were investigated in this study. Three types differently textured labeled as samples I, II III. The results showed that multiple twinning modes basal slip dominated the deformation rolling. Cold-rolled sample I activated larger number double...

We present simulation results based on a phase-field model that describes the migration of recrystallization boundaries into spatially varying deformation energy fields. Energy fields with 2-dimensional variations representing 2 sets of dislocation boundaries lying at equal, but opposite, angles to the moving boundary are considered. The simulations show that the shape and overall migration rat...

During heat treatment, the work piece experiences a range of heating rates depending upon the sizes and types of furnace. When the Al-Si-Mg cast alloy is heated to the solutionizing temperature , recrystallization takes place during the ramp-up stage. The effect of heating rate on recrystallization in the A356 (Al-Si-Mg) alloy was studied using dilatometric and calorimetric methods. Recrystalli...

Ice recrystallization is of great importance to both fundamental research and practical applications, however understanding and controlling ice recrystallization processes remains challenging. Here, we report the discovery of an ion-specific effect on ice recrystallization. By simply changing the initial type and concentration of ions in an aqueous solution, the size of ice grains after recryst...

Control of the material microstructure in terms of the grain size is a key component in tailoring material properties of metals and alloys and in creating functionally graded materials. To exert this control, reliable and efficient modeling and simulation of the recrystallization process whereby the grain size evolves is vital. The present contribution is a review paper, summarizing the current...

Abstract With the aim of analyzing post-deformation Recrystallization (PDRX) 22MnB5 steel and grain size evolution after hot forming sheet using BAEHR 805 A/D thermo-mechanical simulator, several isothermal stress relaxation tests were performed in a temperature range 800 to 950 °C, predeformation 0.4 0.8 strain rate 0.01 s −1 . As result deformation, PDRX kinetics can be described based on an ...

Abstract The effects of Nb addition on the recrystallization kinetics and recrystallized grain size distribution after cold deformation were investigated by using Fe-30Ni Fe-30Ni-0.044 wt pct steel with comparable starting distributions. samples deformed to 0.3 strain at room temperature followed annealing 950 °C 850 for various times; microstructural evolution non- fully characterized, along s...