background: in this study, adsorbentn process performance was assessed using nickel oxide nanoparticles for wastewater treatment containing mono azo orange ii dye in a laboratory scale. methods: the effects of various factors such as adsorbent dosage, contact time, ph and initial dye concentration were investigated. findings: based on the obtained results, the optimum ph range to dye removal is...

decolorization of aqueous solutions containing ionic dyes (reactive blue 19 and acid black 172) by a tfc commercial polyamide nanofilter (nf) in a spiral wound configuration was studied. the effect of operating parameters including feed concentration (60-180 mg/l), pressure (0.5-1.1 mpa) and ph (6-10) on dye removal efficiency was evaluated. the response surface method (rsm) was utilized for th...

this study evaluates the effectiveness of adsorption process by granular activated carbon (gac) compared with a novel formulation of coagulation - flocculation process for dye removal from textile wastewater. in this regard, acidic, reactive, disperse and direct red dye are used to prepare the synthetic dye. dominant wave length for each dye is determined by spectrophotometeric method. using ga...

Methylene blue was efficiently removed from aqueous solution by foam flotation using a rhamnolipid a biosurfactant as a dye collector. The effects of four parameters, namely, pH (1.5–11.5), frother concentration (5–65 ppm), aeration rate (2–6 L/min) and rhamnolipid to methylene blue weight ratio (0.5–6.5), on dye removal were studied and optimized using response surface methodology. Results...

Introduction: Dyes have complicated structures, they are usually toxic and resistant to biological treatment and enter the environment through industrial waste streams. The aim of this study was to review the isotherm and kinetic adsorption studies of Reactive Blue 19 (RB19) dye onto Jujube stems powder from synthetic textile wastewater. Materials and Methods: This study was conducted in labo...

Dye-containing wastewater generated from textile industries is a major source of environmental pollution. Azo dyes, which are the largest group of coloring agents, are widely used in industries.This research investigated the photocatalytic decolorization and degradation of an azo dye Reactive Red 198 (RR198) in aqueous solution with TiO2-P25 (Degussa) as photocatalyst in slurry form using UV li...

In this research modified Kaolin by Cetyltrimethylammonium bromide is used as an adsorbent for the removal of Reactive Blue 21 from aqueous solutions. Response Surface Methodology was used to study the effect of independent variables, such as Reactive Blue 21 dye concentration (20, 40, 60, 80 and 100 mg/L), time (10, 20, 30, 40 and 50), initial pH (2, 4, 6, 8 and 10) and modified Kaolin dosage ...

The feasibility of employing nanofiltration (NF) in the decolorization of ionic (direct blue 86) and nonionic (disperse blue 56) dye aqueous solutions was investigated. The effects of feed concentration (60- 180 mg/l), pressure (0.5- 1.1 MPa) and pH (6- 10) were studied. Experiments were performed in a laboratory- scale set up by using a TFC commercial spiral wound polyamide nanofilter. The res...