Hairpin bandpass filter are compact structures they may theoretically be obtained by folding the resonator of parallel-coupled half wave length resonator which reduces the coupling between resonators. This type of U shape resonator is so called hair pin resonator. In the present paper a novel technique has been proposed for the estimation of bandwidth for variation of slot length on the bandpas...

We demonstrate optical 2R regeneration in an integrated silicon device consisting of an 8-mm-long nanowaveguide followed by a ring-resonator bandpass filter. The regeneration process is based on nonlinear spectral broadening in the waveguide and subsequent spectral filtering through the ring resonator. We measure the nonlinear power transfer function for the device and find an operating peak po...

We theoretically present the analysis and design of a nanoplasmonic bandpass filter with flat-top spectral characteristics by cascading a series of directly connected rectangular ring resonators based on metal-insulator-metal waveguides. Analyzed by the equivalent lumped circuit model of the transmission line to plasmonic waveguides, the transmission properties of a symmetric rectangular ring r...

A novel type of dual-mode microstrip bandpass filter using degenerate modes of a meander loop resonator has been developed for miniaturization of high selectivity narrowband microwave bandpass filters. A filter of this type having a 2.5% bandwidth at 1.58 GHz was designed and fabricated. The measured filter performance is presented.

We demonstrated a vertically coupled microring resonator (VCMRR) filter as an Add/Drop wavelength filter. However, the accuracy of center wavelength was not sufficiently high for dense wavelength division multiplexing (DWDM) systems. Thus, a UV trimming technique using a SiN (n=2.01 at λ=1.55 μm) ring core was previously developed. Although a wide center wavelength trimming range of −12.1 nm an...

In this paper, a compact tri-band bandpass filter (BPF) using multi-stub-loaded resonator with controllable frequencies is presented. The multi-stub-loaded resonator consists of a main transmission line, two open stubs and a short stub. Characterized by using evenand odd-mode analysis, it is found that the resonator consists three modes, and the modes can be controlled individually, which enabl...

The use of a filter bank IIR filters for the spectral decomposition and analysis signals has been popular many years. As such, new filter-bank resonator-based structure, representing an extremely hardware-efficient received good deal attention. Recently, multiple-resonator (MR)-based general cascaded-resonator (CR)-based have proposed. In comparison to single-resonator-based analyzers, analyzer...

In this paper, a novel dual-band bandpass filter (BPF) based on a single short-ended dual-mode resonator (SEDMR) is presented. According to the voltage distribution of the resonator, two pairs of loaded open stubs, inside and outside of the resonator, are utilized to tune the center frequency and the external quality factor of the first passband respectively, while there is no influence on the ...

Received Sep 24, 2017 Revised Dec 27, 2017 Accepted Jan 16, 2018 This paper presents two dual-mode rectangular ring resonators, designed at RF frequency above 20 GHz for bandpass filter applications. The first resonator is designed at 20 GHz using single layer microstrip technology, on Rogers Duroid TMM10 substrate with the following characteristics; relative dielectric constant (εr) = 9.2, sub...