AIM To evaluate and compare the shear bond strength of metal brackets bonded to ceramic surfaces using different conditioning methods and to assess the site of bond failure after debonding. MATERIALS AND METHODS A total of 70 ceramic surfaces were produced with uniform shape, size and composition. The samples were divided into 7 groups (each of 10 samples). Group 1 was the control group (untr...

OBJECTIVES Three activated organofunctional silane coupling agents alone and blended with a non-functional cross-linker silane were evaluated as adhesion promoters in an experiment where a bis-GMA (bis-phenol-A-diglycidyldimethacrylate) resin was bonded to silicatized titanium. The adhesive performances of the silanes were assessed as shear bond strength values. MATERIALS AND METHODS 3-Methac...

The modification of surfaces by the application thin films has been used in regenerative medicine area to increase biocompatibility metal implants. Titanium alloy recently as substrate polymerization for biomedical application. In this context, silane were obtained plasma favor sol-gel method and influence different pressures obtaining these argon was evaluated from alkoxysilane precursor tetra...

The present work reports an effect of surfacemodification of indium tin oxide (ITO) particles with chemicals on their electronic conductivity properties. Examined chemicals were polyvinyl alcohol (nonionic polymer), poly(diallyl dimethyl ammonium chloride) (cationic polymer), poly(sodium 4-styrene-sulfonate) (anionic polymer), (2-aminopropyl) trimethoxy silane (APMS) (silane coupling agent with...

OBJECTIVES This study characterized the feldspathic ceramic surfaces after various silanization protocols. METHODS Ceramic bars (2 mm × 4 mm × 10 mm) (N = 18) of feldpathic ceramic (VM7, VITA Zahnfabrik) were manufactured and finished. Before silane application, the specimens were ultrasonically cleaned in distilled water for 10 min. The ceramic specimens were randomly divided into nine group...

With the aim to enhance interfacial adhesion of a hydrophobic polymer matrix and cellulosic fibers and fillers, chemical surface modifications with silane coupling agents are performed. Thermogravimetric analysis (TGA) could be used to determine the degree of surface functionalization. However, similar thermal properties of treated and untreated cellulose hamper a precise determination of silan...

The authors have studied the effect of plasma power, reactor outgassing rates, and of silane purity on the oxygen, carbon, and nitrogen contents of amorphous silicon material prepared by the very high frequency ~70 MHz! glow discharge technique. The silane purity could be optionally enhanced by the application of a getter-based silane gas purifier. It was found that oxygen incorporation was enh...

This study assessed the effect of different etching time of hydrofluoric acid and ultrasonic cleaning of the etched ceramic surface on the resin microtensile bond strength stability to a feldspathic ceramic. The research hypotheses investigated were: (1) different etching time does not affect the adhesion resistance; (2) ultrasonic cleaning improves the adhesion resistance. Forty-eight (48) blo...

BACKGROUND AND OBJECTIVES Acrylic resin ruled the dental profession for 60 years, and this success is attributed to its aesthetics, handling properties, physical and biological compatibility, its stability in oral environment and its cost effectiveness. The objective of this study is to evaluate and compare the bond strength of acrylic resin teeth treated with various conditioning materials lik...

The objective of this study was to investigate the rebonding effect of a new silane coupling agent on various ceramic brackets bonded to ceramic specimen. Different ceramic brackets (Fascination 2, Clarity SL, and In-OvationC) were assigned to three groups: rebonding with new silane coupling agent, rebonding with conventional silane coupling agent, or regular bonding as control (n = 16). Bracke...