Enormously large amount of heat produced by human activities is now mostly wasted into the environment without use. To realize a sustainable society, it is important to develop practical solutions for waste heat recovery. Here, we demonstrate that a tubular thermoelectric device made of tilted multilayer of Bi(0.5)Sb(1.5)Te3/Ni provides a promising solution. The Bi(0.5)Sb(1.5)Te3/Ni tube allows...

An analytical model for a condenser with a wetted surface is developed by applying the governing conservations and rate equations and invoking the heat and mass transfer analogy. The heat exchanger is discretized in both the airflow and refrigerant-flow directions for a cross-flow configuration. Axial conduction along the tube walls is neglected and uniform distribution of water is assumed at t...

Heat exchanger is a universal process equipment, which widely used in chemical industry, oil refining, thermal power and other industries. Shell-and-tube heat exchangers often fail prematurely due to flow-induced vibration. In this paper, aiming at the problem of severe vibration shell-and-tube an enterprise, acceleration sensors are measure shell tube side exchanger. Through analysis measureme...

fouling is one of the main parameters in design of any exchanger. ignoring this parameter causes problems such as overheating or under- heating of process streams. in this article a heat exchanger network was designed using process streams data in cdu of tehran refinery. then using tema fouling factors, network exchangers were designed and area and cost were estimated. by changing fouling facto...

The water-cooled heat exchanger is one of the key components in a pulse tube refrigerator. Its heat exchange effectiveness directly influences the cooling performance of the refrigerator. However, effective heat exchange does not always result in a good performance, because excessively reinforced heat exchange can lead to additional flow loss. In this paper, seven different water-cooled heat ex...

The tube to tube sheet welding joints of heat exchanger is the most critical joints. A special Nondestructive testing technology was proposed, which is based on the digital radiographic imaging automatic inspection system to the characteristics on the tube to tube sheet welding joints of heat exchanger. A new style Linear Diode Arrays as a device is used to receive ray, which will be fixed on a...

A multi-tube, spirally-wound, cryogenic heat exchanger, the main heat exchanger (MHE) is the principal piece of heat-transfer equipment in mixed-refrigerant liquefaction cycles for producing liquefied natural gas (LNG). An MHE unit operation model called the spirally-wound tube-bundle module was developed as an integral component of the dynamic simulation capabilities for a process modeling pac...