In this study, non-linear behavior of diagonally stiffened steel plate shear walls as a seismic resisting system has been investigated, and theoretical formulas for estimating shear strength capacity of the system have been proposed. Several validated analytical finite element models of steel shear walls with various stiffener dimensions are generated to verify and compare the analytical and th...

Due to architectural, mechanical and even structural considerations, in some cases there is need to create some openings in the composite steel shear walls. Presence of the openings can considerably affect the wall behavior. Therefore in this study, the effects of the opening on the behavior of composite steel shear walls are investigated. For this purpose, first an experimental specimen withou...

Steel-concrete-steel (SCS) sandwich panels are composed of two steel plates with low thicknesses and high densities and strengths and one thick layer between both plates with low strength and density known as core that is composed of concrete. Cohesive material-epoxy resin or shear connectors are usually used to connect the plates to the concrete core. SCS sandwich composites are being develope...

The floor beams of steel buildings, cold-formed steel floor joists in particular, often require large web openings, which may affect their shear capacities. A cost effective way to mitigate the detrimental effects of such openings is to weld/fasten reinforcements. A difficulty associated with an experimental investigation to establish suitable reinforcement schemes for openings in shear zone is...

In this present study, experimental work was conducted to study the effectiveness of newly innovated steel-CFRP composite (CFRP laminates sandwiched between two steel strips) as stirrups. A total numbers of eight concrete beams were tested under four point loads. Each beam measured 1600 mm long, 160mm width and 240 mm depth. The beams were reinforced with different shear reinforcements; one wit...

This paper presents an ongoing research project on the validation of “hybrid” precast concrete wall structures for use in seismic regions. Hybrid precast walls utilize a combination of mild (e.g., Grade 60) steel and high-strength unbonded posttensioning (PT) steel for lateral resistance across horizontal joints. The mild steel reinforcement is designed to yield and provide energy dissipation. ...

This paper investigates the effect of moisture content on interface shear strength between offshore clay and steel plate. Although, sensitive and high plasticity offshore clay deposits are widely distributed in Malaysia and many other countries in the world, and steel is a vital construction material for many structures, research works on interaction between offshore clay and steel surface are ...

This paper presents an experimental program dealing with the shear strengthening with FRP systems of URM walls built with concrete and clay units. Ten concrete and five clay masonry panels, strengthened with FRP composites in the form of laminates and rods, and stainless steel, were loaded along the wall diagonal to observe their shear performance. The dimension of the concrete masonry panels w...

The steel plate shear wall is one of the seismic resistance devices which installed in flame building to improve horizontal stiffness and strength. Shear force loaded on when acts building. In order prevent overall buckling by force, some stiffeners are welded types arrangements. Therefore, design very important strength deterioration maintain restoring force.