This paper presents experimental research on structural behaviour of normal and recycled aggregate concrete filled steel tube (RACFT) columns externally strengthened with carbon fibre reinforced polymer (CFRP) sheets and subjected to axial loading. A total of 22 specimens were tested to investigate the influence of the following variables: (1) tube configurations, circular or square, solid or h...

An attempt has been made to use this composite structural member as a column with a modification of flutes on the steel tube which enhances the aesthetics and development area of sheet by which the moment of inertia gets increased by about 17 to 40 % for rectangular flutes and 9 to 23 % for triangular flutes. Confining concrete by providing triangular and rectangular shape fluted steel tube has...

This paper presents research documenting the local damage progression in rectangular concrete-filled steel tube beam-columns and connections in composite frames. Local damage is quantified through the development of damage indices based upon results of worldwide experiments. A fiber-based finite element formulation is also introduced for assessing global capacity and seismic demand.

We demonstrate a spray pyrolysis method to grow carbon nanotubes (CNTs) with high degree of crystallinity, aspect ratio and degree of alignment on a variety of different substrates, such as conventional steel, carbon fibres (CF) and ceramics. The process consists in the chemical vapour deposition of both a thin SiO2 layer and CNTs that subsequently grow on this thin layer. After CNT growth, inc...

Within the Fives Group, Fives Stein, Fives DMS and Fives Bronx design and supply a wide range of production, transformation and treatment lines for carbon, stainless and silicon steel. From pickling and annealing lines to the continuous galvanizing line, from rolling mills to tube and pipe mills, our teams will offer you their expertise and the best available technologies to achieve the highest...

Bridges are often built in locations susceptible to multiple extreme hazards. Meeting some or all of these constraints drives the development of innovative multi-hazard design concepts. This paper presents the results of research conducted to develop and experimentally validate such multi-hazard bridge pier concepts. The first concept is a pier-bent made of concrete filled steel tube columns. F...

Heat exchanger units used in steam raising power plant are often manufactured using many metres of austenitic stainless steel tubes that have been plastically formed (bent and swaged) and welded into complex shapes. The amount of plastic deformation (pre-straining) before welding varies greatly. This has a significant effect on the mechanical properties of the welded tubes and on the final resi...

Studies of the crushing behavior of closed-cell, aluminum foam-filled aluminum and steel tubes have shown an interaction effect between tube wall and foam filler [1, 2, 3]. The crushing loads of foam-filled tubes are, therefore, found to be higher than the sum of the crushing loads of foam (alone) and tube (alone) mainly due to this effect. Santosa et al. [1], based on FEM results, proposed the...