Introduction: Dental ceramics are considered as materials that can restore the appearance of natural teeth. Etching the inner surface of a ceramic restoration with hydrofluoric acid (HF) followed by using a silane coupling agent is a well-known and recommended method to increase the bond strength. The aim of etching on ceramic structure is to enhance the surface roughness (Ra) and energy and to...

Influence of initial surface roughness on friction and wear processes under fretting conditions was investigated experimentally. Rough surfaces (Ra=0.15-2.52 μm) were prepared on two materials: carbon alloy (AISI 1034) and titanium alloy (Ti-6Al-4V). Strong influence of initial surface roughness on friction and wear processes is reported for both tested materials. Lower coefficient of friction ...

In this study, the prediction of surface roughness heights Ra and Rt of turned surfaces was carried out using neural networks with seven inputs, namely, tool insert grade, workpiece material, tool nose radius, rake angle, depth of cut, spindle rate, and feed rate. Coated carbide, polycrystalline and single crystal diamond inserts were used to conduct 304 turning experiments on a lathe, and surf...

Understanding friction between material pairs is very crucial when utilizing the materials in various applications, including mechanical and biological systems. In the present investigation, efforts were made to study the influence of surface texture and roughness on friction and transfer film formation during sliding of Ultra High Molecular Weight Polyethylene (UHMWPE) pins against steel plate...

There have been a number of attempts to modify the surface of dental implants to improve osseointegration. These modifications include alterations of surface chemistry and roughness. The purpose of this study was to examine the early response of human osteoblast-like cells placed on Ti-6Al-7Nb disks that had a similar grooved surface topography and three different levels of surface roughness (R...

AIM To investigate and compare the effects of toothbrushes with different hardness on abrasion and surface roughness of composite resins. MATERIALS AND METHODS Toothbrushes (DENT. EX Slimhead II 33, Lion Dental Products Co. Ltd., Tokyo, Japan) marked as soft, medium and hard, were used to brush 10 beam-shaped specimens of each of three composites resins (Venus [VEN], Venus Diamond [VED] and V...

INTRODUCTION The purpose of this study is the evaluation of the amount of surface roughness (Ra) of Zirconia Ceramic following different surface treatments as well as the assessment of its shear bond strength to composite resin. METHODS 40 sintered zirconia ceramic block samples were randomly divided in 4 groups of 10 and underwent the following surface treatments: a) Control group without tr...

BACKGROUND Intraoral adjustment and polishing of dental ceramics often affect their surface characteristics, promoting increased roughness and consequent biofilm growth. This study correlated surface roughness to biofilm development with four commercially available ceramic materials. METHODS Four ceramic materials (Vita Enamic®, Lava™ Ultimate, Vitablocs Mark II, and Wieland Reflex®) were pre...

This paper describes a non-contact technique to assess the differences in surface characteristics of the ground components. The computer vision based system is used to analyze the pattern of scattered light from the surface to asses the surface roughness of the component. The ground specimens were manufactured using varying machining parameters. The images of the specimens are captured using a ...